# ACMER S2 Pro 36W Review: Big Power, Bare-Bones Price

ACMER S2 Pro 36W review: single-pass 3mm birch cuts at 900mm/min for $549, plus a real test of the 24,000mm/min speed rating. See what the price leaves out.

- Author: Chris Hoffman (Hoffman Engineering)
- Published: 2026-10-26
- Category: Lasers
- Video: https://www.youtube.com/watch?v=WdSVRxdMKT8
- Web page: https://www.hoffman.engineering/blog/acmer-s2-pro-36w-review-big-power-bare-bones-price/

## Summary

- Product: ACMER S2 Pro 36W
- Price: $549 at time of review
- Verdict: A bare-bones open-frame laser for someone who mainly wants to cut and already has a safe, well-ventilated place to run it. If it's going indoors, or anywhere other people can easily get to it, look at an enclosed machine instead.

A mahogany phone stand and mandala came off this laser in under six minutes. A photo engraving took under seven. And the **ACMER S2 Pro 36W** that made them costs $549, because ACMER took almost everything off it except the laser. This ACMER S2 Pro 36W review covers a month and more than thirty jobs, including a test of the 24,000 millimeter-per-minute speed rating, to find out if a bare-bones machine is the smart way to buy this much power.

## What the ACMER S2 Pro 36W Is

The S2 Pro is an open-frame diode laser. It works well on wood, leather, slate, dark acrylic, and coated metals. Like other blue diodes, it can't directly cut clear acrylic, and bare glass usually needs a coating or some other workaround.

What stands out is what's missing. There's no touchscreen, no camera, no enclosure, and no lights. The Basic kit doesn't include a honeycomb bed either. What's left is **thirty-six watts of laser**, a frame, and an air pump.

It comes in 36 and 48 watt versions, and I tested the 36. The work area is **400 by 400 millimeters**, a little under 16 by 16 inches. ACMER rates it at 24,000 millimeters per minute, and the firmware agrees. Whether you can use that speed on detailed work is a different question.

## Assembly: An Hour, and Two Things to Watch

This is a full kit build: gantry, belts, cable chain, and electronics. It took me about an hour from opening the box to my first cut.

Two things to watch for. First, the manual shows the cable chain guide on top of the left rail, but it needs to hang underneath. The finished-machine photo gets it right, so check that picture before you tighten everything down.

Second, the guide wheels on my Y-axis were loose. They adjust with eccentric nuts, and ACMER includes the wrench, but the manual never mentions the adjustment. Skip it and the gantry wobbles. Once I tightened mine, they stayed put for the rest of the month.

The S2 Pro is marketed as a "linear guide rail" design, but it rides on metal guide wheels, not the ball-bearing linear carriages you'll find on more expensive machines. The belts are anchored only at the ends, so they float in mid-air across the frame. It looks odd, but I didn't see it help or hurt a single job.

## Speed Test: 24,000mm/min Rated, 9,600 for Detail

The 24,000 is there. Acceleration is what holds it back. The firmware sets it at 1,000 millimeters per second squared on X and only 600 on Y, so on small curves the head has to slow down before it ever reaches the speed you asked for.

My circle and text tests stayed clean and round up to **9,600 millimeters per minute**. By 14,400, the smallest rings were breaking up. At 24,000, both the circles and the small text were faint and full of gaps.

There's a second effect on top of that. In LightBurn's default dynamic power mode, the laser's output drops as the head slows down, so small details come out lighter too.

For detailed work, I stayed at 9,600 or below. Big fills and long straight lines can go faster.

## Focus, Air Assist, and Noise

Focus is manual but quick. Flip down the focus lever, loosen two screws, lower the module until the lever touches your material, and tighten it back up. It takes about fifteen seconds.

A **30 liter per minute air pump** is built in. Air assist blows a jet of air at the cut, clearing smoke and debris for deeper cuts and cleaner edges. I had it on for every test here.

This isn't a quiet machine. I measured **69 to 70 decibels** from about two feet away, and the air pump and the laser's cooling fan are about equally loud.

## Controls, ACMER Studio, and LightBurn

The control box has an emergency stop, a key lock, and a start button, plus Wi-Fi, USB, and a microSD (TF) card slot. There's no screen. Everything runs from your computer or the card.

**ACMER Studio** is free, and it found the laser without any trouble. It includes material presets, but on my setup, picking one didn't change the speed or power. I'm not sure if that's a bug, but it makes the presets almost useless. The material test generator worked well, and the ACMER Project Library has ready-to-use projects to get you started.

I used **LightBurn** for most of my testing. The S2 Pro is a GRBL device, so it only needs the LightBurn Core license, and the manual walks you through the setup. It worked on the first try.

## Wood: Single-Pass Cuts and Photo Engraving

Cutting is where the ACMER S2 Pro 36W makes its case. 3mm birch plywood cut through in a single pass at **900 millimeters per minute** and 100 percent power, with a best kerf offset of 0.08 millimeters.

Dark mahogany plywood is tougher, but it still cut cleanly at 750 millimeters per minute. At 850, it didn't make it all the way through. The phone stand and mandala from the intro took 5 minutes and 37 seconds.

For engraving, birch ran at 15,000 millimeters per minute and 80 percent power. For photos, the best result came from Jarvis dithering at the same speed, 40 percent power, and a 0.1 millimeter line interval. That photo took 6 minutes and 47 seconds.

## Acrylic: Clean Cuts and a Power Mode Lesson

Blue diodes can't directly cut clear acrylic, but dark acrylic absorbs the laser fine. 3mm [black acrylic](https://amzn.to/3vZNV4c) cut through in a single pass at **600 millimeters per minute**, and engraved at 6,000 and 15 percent power.

The ruler ticks on my keychains were the tricky part. At 3,000 millimeters per minute in the default power mode, they came out faint. That's the same power drop from the speed test.

Switching to constant power mode fixed it, although the ticks came out a bit deeper than I wanted. Keep in mind that constant power doesn't back off when the head slows down, so it can overburn corners on other jobs.

## Leather, Slate, and Coated Aluminum

These three ran without any drama. Here are the settings that worked:

- **Leather:** [Veg tan leather](https://amzn.to/3rdNmjO) engraved at 3,000 millimeters per minute and 25 percent power.
- **Slate:** A [slate coaster](https://link.amazon/B0fNX22m4) worked at 10,000 millimeters per minute and 60 percent. The slate photo needed 6,000 and full power.
- **Coated aluminum:** An [aluminum card](https://link.amazon/B0j34enZ1) ran at 14,540 millimeters per minute and 60 percent, and even the small text came out clean.

## Stainless Steel Color Marking

A blue diode laser can't engrave bare metal by removing material the way a fiber laser does. Higher-powered diodes can do something else, though: create colored oxide marks on stainless steel.

The S2 Pro can do that. At 6,000 millimeters per minute and 25 to 30 percent power, I got blues, purples, browns, and oranges directly on bare [stainless steel](https://link.amazon/B0bbfew5c), using nothing but the 36 watt diode.

## Safety and Fumes: Open Frame at 36 Watts

This is an open-frame 36 watt laser with no enclosure around the work area. Direct exposure, or even a strong reflection, can cause permanent eye damage almost instantly.

Anyone in the area needs laser safety glasses rated for this wavelength. ACMER includes a pair in the box. But with an open machine like this, I'd rather control who can get near it while it's running than rely on glasses alone.

Then there's the smoke. I run this in a covered patio workshop with fans pushing the fumes outside. That isn't filtering anything. It's moving the smoke out of the way. If your laser lives in a spare bedroom or a closed garage, a fan won't be enough.

## Price and What $549 Leaves Out

As I write this, the S2 Pro 36W Basic Pack is **$549**, down from $799. The Camera Pack is $653 and the Rotary Pack is $776. The 48 watt version starts at $699. I haven't tested that one, so I can't tell you if the extra $150 is worth it.

The Basic kit doesn't include a honeycomb, so budget another forty or fifty dollars for one. Cutting directly on a flat surface leaves more back-burn on your parts and gives smoke nowhere to escape underneath. If cutting is your priority, I'd consider a honeycomb almost mandatory.

## Verdict: Should You Buy the ACMER S2 Pro 36W?

The ACMER S2 Pro 36W is a bare-bones diode laser built around one thing: cutting power. You get a 36 watt module, built-in air assist, and fast single-pass cutting, without paying for a touchscreen, a camera, or an enclosure. Across more than thirty jobs, nothing broke, loosened, or needed adjustment after my initial setup.

The 24,000 millimeter per minute rating is there, but for detailed engraving, 9,600 or below was much more useful. My biggest complaint is the missing honeycomb, and the assembly manual could use another editing pass. The assembly issues are one-time problems. The honeycomb is a cost I'd factor into the purchase price from the start.

It makes the most sense if you mainly want to cut, you already have a safe, well-ventilated place for an open-frame laser, and you'd rather spend your money on laser power than convenience features. If it's going indoors, or anywhere other people can easily get to it, I'd look at an enclosed machine instead.

[Check the latest price at ACMER](https://acmerlaser.com/products/acmer-s2-pro-laser-engraver?utm_source=YTB&utm_medium=KOL&utm_content=Hoffman%20Engineering&utm_campaign=Hoffman%20Engineering)

## Pros and cons

### Pros

- Cut 3mm birch plywood in a single pass at 900mm/min and 100 percent power
- Single-pass cuts in dark mahogany plywood at 750mm/min and 3mm black acrylic at 600mm/min
- Built-in 30 L/min air assist pump, included in the Basic kit
- Color marks bare stainless steel with blues, purples, browns and oranges
- Manual focus takes about fifteen seconds
- Worked in LightBurn on the first try and only needs the Core license
- Across more than thirty jobs, nothing broke, loosened, or needed adjustment after setup

### Cons

- Basic kit has no honeycomb bed, so budget another forty or fifty dollars
- Manual shows the cable chain guide on top of the left rail when it has to hang underneath
- Loose Y-axis guide wheels needed an eccentric nut adjustment the manual never mentions
- Small detail breaks up above 9,600mm/min despite the 24,000mm/min rating
- ACMER Studio material presets didn't change the speed or power on my setup
- No touchscreen, camera, enclosure or lights
- 69 to 70 dB at about two feet, with the air pump and cooling fan about equally loud

## Specs

| Spec | Value |
| --- | --- |
| Laser Power | 36W diode (a 48W version is also sold) |
| Work Area | 400 x 400mm, a little under 16 x 16 inches |
| Rated Max Speed | 24,000mm/min. In testing, circles and small text stayed clean up to 9,600mm/min |
| Acceleration | 1,000mm/s² on X, 600mm/s² on Y |
| Kerf Offset (tested) | 0.08mm on 3mm birch plywood |
| Air Assist | Built-in 30 L/min air pump |
| Focus | Manual, with a flip-down lever and two screws. About fifteen seconds |
| Motion System | Metal guide wheels with eccentric nuts, marketed as a linear guide rail design |
| Controls | Emergency stop, key lock and start button. No screen |
| Software | ACMER Studio (free), LightBurn (Core license) |
| Connectivity | Wi-Fi, USB, microSD (TF) card |
| Noise (tested) | 69 to 70 dB from about two feet away |

## Where to buy

- [ACMER S2 Pro 36W Basic Pack](https://acmerlaser.com/products/acmer-s2-pro-laser-engraver?utm_source=YTB&utm_medium=KOL&utm_content=Hoffman%20Engineering&utm_campaign=Hoffman%20Engineering): $549
- [ACMER S2 Pro 36W Camera Pack](https://acmerlaser.com/products/acmer-s2-pro-laser-engraver?utm_source=YTB&utm_medium=KOL&utm_content=Hoffman%20Engineering&utm_campaign=Hoffman%20Engineering): $653
- [ACMER S2 Pro 36W Rotary Pack](https://acmerlaser.com/products/acmer-s2-pro-laser-engraver?utm_source=YTB&utm_medium=KOL&utm_content=Hoffman%20Engineering&utm_campaign=Hoffman%20Engineering): $776
- [ACMER S2 Pro 48W Basic Pack (not tested)](https://acmerlaser.com/products/acmer-s2-pro-laser-engraver?utm_source=YTB&utm_medium=KOL&utm_content=Hoffman%20Engineering&utm_campaign=Hoffman%20Engineering): $699

Prices may have changed since this review.

## FAQ

### Is the ACMER S2 Pro 36W worth it?

It is if you mainly want to cut and you already have a safe, well-ventilated place for an open-frame laser. It cut 3mm birch plywood in a single pass at 900mm/min, and nothing broke or loosened across more than thirty jobs. Plan on adding a honeycomb to the $549 Basic Pack. If the laser is going indoors or anywhere other people can easily reach it, an enclosed machine is the better choice.

### How fast can the ACMER S2 Pro engrave in practice?

ACMER rates it at 24,000mm/min and the firmware agrees, but acceleration holds it back on small curves. My circle and text tests stayed clean and round up to 9,600mm/min. By 14,400 the smallest rings were breaking up, and at 24,000 the circles and small text were faint and full of gaps. Big fills and long straight lines can go faster, and birch engraved well at 15,000mm/min.

### What materials can the ACMER S2 Pro 36W cut and engrave?

In my testing it cut 3mm birch plywood, dark mahogany plywood and 3mm black acrylic in a single pass. It engraved birch, leather, slate, black acrylic and coated aluminum, and it color marked bare stainless steel with oxide colors. Like other blue diode lasers, it can't directly cut clear acrylic, and bare glass usually needs a coating or another workaround.

### Does the ACMER S2 Pro work with LightBurn?

Yes. It's a GRBL device, so it only needs the LightBurn Core license, and the manual walks you through the setup. It worked on the first try, and I used LightBurn for most of my testing. ACMER Studio is the free alternative.

### Does the ACMER S2 Pro Basic Pack come with a honeycomb bed?

No. Budget another forty or fifty dollars for one. Cutting directly on a flat surface leaves more back-burn on your parts and gives smoke nowhere to escape underneath, so if cutting is your priority I'd consider a honeycomb almost mandatory.

---

This ACMER S2 Pro 36W was provided by ACMER for review. This post contains affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. All opinions are my own.
