# Anycubic Kobra 3 Max Hands-On: Huge Volume, Up to 8 Colors

Anycubic Kobra 3 Max hands-on first look. A full-bed Gridfinity print, real slicer speeds and 8-color ACE Pro plans on a 420 x 420 x 500mm printer. Read on.

- Author: Chris Hoffman (Hoffman Engineering)
- Published: 2025-03-24
- Category: 3D Printers
- Video: https://www.youtube.com/watch?v=gDo-nLsXtTY
- Web page: https://www.hoffman.engineering/blog/anycubic-kobra-3-max-hands-on-huge-volume-8-colors/

## Summary

- Product: Anycubic Kobra 3 Max
- Price: $429.99 at time of review
- Verdict: After the first 24 hours, the Kobra 3 Max turns out clean, large prints on stock profiles. It makes the most sense if build volume matters more to you than raw speed.

The **Anycubic Kobra 3 Max** prints a full 420 x 420mm Gridfinity plate in a little over 5 hours, with every line stuck to the bed. This Kobra 3 Max first look covers the hardware, the real print speeds, my first prints from the opening 24 hours and how the ACE Pro adds up to 8 colors.

## Kobra 3 Max Build Volume: 88 Liters

The headline number is the **420 x 420 x 500mm** print volume. That works out to 88 liters, or as Anycubic puts it, two carry-on suitcases. It's the same volume as the Kobra 2 Max, but it brings along everything from the Kobra 3 series, including multicolor printing with the ACE Pro.

To put the bed size in perspective, a full 10 x 10 Gridfinity base plate fits on it. I'm planning large cosplay prints, and entire helmets fit in this volume without splitting them into pieces.

I bought this printer myself with help from my Patreon members. It isn't sponsored.

## Frame and Motion: A Big Bed Slinger

Like the original Kobra 3, the Max is a bed slinger. The hotend moves left and right on X and up and down on Z, and the bed moves on Y.

X and Y are belt-driven and ride on metal wheels. The Z axis uses rubber V-slot wheels. The frame is heavy and feels sturdy, and the large braces holding up the Z axis help a lot.

There are two Z motors, and a belt across the top links the two lead screws so they stay in sync. The Y axis also gets two motors, which you need to move a bed this size.

## Kobra 3 Max Print Speed: Rated vs Real

This printer won't break speed records. Anycubic rates it at **10,000mm/s² acceleration** and print speeds up to **600mm/s**. The profiles in Anycubic Slicer Next are much more conservative, though. I saw print speeds between **200 and 300mm/s**.

That still looks fast when you watch a bed this big fling back and forth. Put it on a sturdy table.

## Build Plate, Auto Leveling and Input Shaping

The bed uses a **double-sided magnetic spring steel PEI** plate. It flexes, so prints pop off easily. As on the Kobra 3, there's a nozzle wipe strip at the back.

The Kobra 3 Max runs modern Klipper-based firmware. Automatic bed leveling and automatic Z offset gave me a clean first layer across the whole plate, which matters a lot on a bed this large. It also has built-in vibration compensation for input shaping, which cuts down ghosting and echoes along the edges of prints.

## Up to 8 Colors With the ACE Pro

Multicolor printing comes from connecting the **ACE Pro**. My ACE Pro hadn't arrived yet for this first look, but it works the same way as on the Kobra 3. One ACE Pro gives you up to 4 colors. Two connected together give you up to 8 colors in one print, and the printer purges and wipes the nozzle at each color change.

That purging creates waste, the "poop" I've been measuring on the Kobra S1. The amount depends on the number of color changes, which comes down to the number of layers. Print one copy or ten and the color changes stay the same. So on a 420 x 420mm bed, you can pack the plate with copies and cut the waste per part a lot.

Skip object is already enabled. If one part starts to fail, you skip it instead of canceling the whole plate. On a bed this size, that matters even more.

The ACE Pro also does filament backup: when a spool runs out, it switches to the next spool of the same material and color. It reads RFID tags on Anycubic filament to detect type and color, and its built-in heater dries filament, which improves print quality.

## First Prints From the Kobra 3 Max

These came from the first 24 hours, all in high speed PLA from [Sunlu](https://store.sunlu.com/products/over-6kg-of-pla-pla-meta-3d-filaments-1kg-2-2lbs-fit-most-of-fdm-printer?sca_ref=6509515.9CIaM1NpXK&sca_source=tx).

- **Benchy:** the included file printed in **18 minutes**. It turned out well apart from a fair amount of stringing.
- **Included samples:** the shark bottle opener has consistent top and bottom surfaces, and the flexy shark popped right off the bed.
- **Torture test:** the same stringing showed up with Anycubic's default PLA profile, so I'll keep tuning retraction. Overhangs and bridges were solid, with slight drooping on the longest spans.
- **Captain America bust:** finished in a little over **8 hours**. Input shaping kept echo minimal on the crisp edges, especially around the back, and the layers look consistent with no artifacts.
- **Full-bed Gridfinity plate:** this one covered the entire 420 x 420mm print area. It printed with no problems in a little over **5 hours**. The bottom layer was perfect, and every line stuck to the bed.

## Assembly and Setup

Assembly was straightforward because the Kobra 3 Max arrives mostly assembled. The X/Z gantry and the base are fastened together for shipping. You unscrew them, screw the gantry into position, add the two support rods, attach the print head and the touch screen, and plug in the cables.

Start to finish, including the automatic calibration, took about **30 minutes**. The manual walks you through every step, so most people should get up and running without trouble.

## Verdict: Should You Buy the Anycubic Kobra 3 Max?

These are early impressions after about 24 hours, not a full review. So far I'm impressed. Prints come out clean on Anycubic's stock profiles with no tuning, and the full-bed Gridfinity plate was the standout: the whole 420 x 420mm area, every line stuck, a little over 5 hours.

The Kobra 3 Max makes the most sense if you want huge single prints, like cosplay helmets, or full plates of parts, and you care more about volume than top speed. If you want the fastest printer, the 200 to 300mm/s stock profiles and the big bed slinging on Y won't win that race. Stringing with the default PLA profile still needs tuning, and I haven't tested multicolor until the ACE Pro arrives.

Availability has changed since this video. The Kobra 3 Max Combo with the ACE Pro is no longer listed on Anycubic's store, and Anycubic now sells a newer Kobra 3 Max V2 Combo in its place. The printer-only Kobra 3 Max was $429.99 on Amazon when I last checked.

[Check the latest price of the Kobra 3 Max on Amazon](https://www.amazon.com/dp/B0DBDT1W49?tag=hoffeng-kobra3-max-20)

## Pros and cons

### Pros

- 420 x 420 x 500mm build volume, big enough for a full 10 x 10 Gridfinity plate
- A full-bed Gridfinity plate printed with every line stuck down, in a little over 5 hours
- Automatic bed leveling and Z offset gave a clean first layer across the whole bed
- Input shaping kept echo minimal on sharp edges
- Heavy, sturdy frame with dual Z motors and dual Y motors
- Arrives mostly assembled, about 30 minutes to first calibration with a clear manual
- Skip object is already enabled, so one failed part doesn't end a full plate

### Cons

- Noticeable stringing on the Benchy and torture test with the default PLA profile
- Stock slicer profiles run 200 to 300mm/s, well under the rated 600mm/s
- The large bed flings around on the Y axis, so it needs a sturdy table
- Multicolor printing needs the ACE Pro, which wasn't tested yet in this first look
- Slight drooping on the longest bridges

## Specs

| Spec | Value |
| --- | --- |
| Build Volume | 420 x 420 x 500mm (88 liters) |
| Max Speed | 600mm/s rated; 200 to 300mm/s with the stock Anycubic Slicer Next profiles |
| Max Acceleration | 10,000mm/s² (rated) |
| Motion System | Bed slinger. Belt-driven X and Y on metal wheels, Z on rubber V-slot wheels |
| Motors | Dual Z motors with belt-synced lead screws, dual Y motors |
| Build Plate | Double-sided magnetic spring steel PEI |
| Leveling | Automatic bed leveling and automatic Z offset |
| Firmware Features | Klipper-based, input shaping, skip object |
| Multicolor | Up to 4 colors with one ACE Pro, up to 8 with two (not yet tested) |

## Where to buy

- [Anycubic Kobra 3 Max, printer only (Amazon)](https://www.amazon.com/dp/B0DBDT1W49?tag=hoffeng-kobra3-max-20): $429.99
- [Sunlu PLA filament used in the test prints](https://store.sunlu.com/products/over-6kg-of-pla-pla-meta-3d-filaments-1kg-2-2lbs-fit-most-of-fdm-printer?sca_ref=6509515.9CIaM1NpXK&sca_source=tx)

Prices may have changed since this review.

## FAQ

### Is the Anycubic Kobra 3 Max worth it?

After the first 24 hours, it's off to a strong start. Prints came out clean on Anycubic's stock profiles, including a Gridfinity plate that used the entire 420 x 420mm bed. It fits you best if you want huge single prints or full plates of parts and don't need the fastest printer. The full review covers the longer test.

### How big is the Anycubic Kobra 3 Max build volume?

The print volume is **420 x 420 x 500mm**, about 88 liters. Anycubic compares it to two carry-on suitcases. The bed fits a full 10 x 10 Gridfinity base plate, and it's large enough for full cosplay helmets.

### Can the Kobra 3 Max print in multiple colors?

Yes, with Anycubic's ACE Pro. One ACE Pro gives you up to 4 colors, and two connected together give you up to 8 colors in one print. The ACE Pro also handles filament backup, RFID filament detection and filament drying. My ACE Pro hadn't arrived for this first look.

### How fast does the Kobra 3 Max print in practice?

Anycubic rates it at up to 600mm/s and 10,000mm/s² acceleration, but the stock profiles in Anycubic Slicer Next printed between 200 and 300mm/s. The included Benchy file finished in 18 minutes.

### Is the Kobra 3 Max hard to assemble?

No. The gantry and base ship attached, so you unscrew them, screw the gantry into position, add the two support rods, the print head and the touch screen, then plug in the cables. It took about 30 minutes, including the automatic calibration.

---

I purchased this Anycubic Kobra 3 Max myself, thanks to support from my Patreon members. Sunlu provided the filament used for the test prints. This post contains affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. All opinions are my own.
