# Kobra 3 V2 Combo Review: What Changed From the Kobra 3

Anycubic Kobra 3 V2 Combo review: 600mm/s speed, 4-color ACE Pro printing, real test prints and one slicer bug to avoid. See if this $399 combo was worth it.

- Author: Chris Hoffman (Hoffman Engineering)
- Published: 2025-07-17
- Category: 3D Printers
- Video: https://www.youtube.com/watch?v=MrSEEVy0mUk
- Web page: https://www.hoffman.engineering/blog/anycubic-kobra-3-v2-combo-review-what-changed/

## Summary

- Product: Anycubic Kobra 3 V2 Combo
- Price: $399 at time of review
- Verdict: An easy, fast bed-slinger whose ACE Pro made 4-color printing affordable at $399. Anycubic no longer sells it.

The **Anycubic Kobra 3 V2 Combo** paired a 600mm/s bed-slinger with the ACE Pro multicolor system for **$399** at the time of recording, less than the Bambu Lab A1 Combo cost back then. After a month of testing, I printed 4-color Eevees, a painted bust of myself and some tall dice towers on it. This Kobra 3 V2 review covers the hardware and software upgrades, the ACE Pro, the slicer, real print results, and one slicer bug you'll want to avoid. One note up front: Anycubic no longer sells the V2.

## What's New in the Kobra 3 V2: Nozzle and Y-Axis Upgrades

Anycubic took a year of feedback on the original Kobra 3 and turned it into hardware and software changes worthy of a V2.

The first fix is the nozzle. The V2 uses the same style as the [Kobra S1](https://www.hoffman.engineering/blog/anycubic-kobra-s1-combo-first-look-real-cost-of-color/), which should prevent the leaky nozzle that plagued the first batch of Kobra 3 printers. It's a standard **0.4mm brass nozzle**, so be careful with abrasive filaments, and the hotend reaches **300°C** for higher-temperature materials.

The Y axis got beefier too. The rail grew from **40mm to 60mm wide**, which gives the bed more support. That helps the accuracy of the auto bed leveling and keeps things stable at higher speeds, and this printer is rated for up to **600mm/s**. With filament made for high-speed printing, it keeps up without trouble.

## Auto Bed Leveling and a Bigger Build Volume

The V2 keeps **LeviQ 3.0** auto bed leveling. It levels the bed and sets the Z-offset for you, so there's no babystepping the first layer. Every one of my test prints had perfect bottom layers.

On the software side, Anycubic optimized how the printer moves and gained 5mm in both X and Y. That brings the build volume to **255 x 255 x 260mm**, about 4% more space from a software update alone. Original Kobra 3 owners were promised the same larger volume in the third quarter of 2025.

Anycubic also announced regional bed leveling for both the original and the V2. It probes only the area you're about to print on, which should cut the time spent leveling before each job. It wasn't available yet during my testing, so I couldn't try it.

## Build Plate, Frame and Touchscreen

Everything else carries over from the original. The magnetic spring steel plate has textured PEI on both sides, so a damaged side can be flipped. I had no adhesion problems: prints stuck firmly and popped off with a quick flex.

The bed heats evenly. Set to 60°C, the whole surface read between 57 and 61°C, and it's rated up to 110°C. A single Z motor drives two threaded rods tied together by a belt at the top, which keeps them in sync.

Up front you'll find the ACE Pro port, two USB ports and a **4.3-inch color touchscreen**. It's responsive, the menus are easy to navigate, and it tilts. Side-to-side viewing angles are weak, though, so you need to look at it fairly straight on.

The printer runs **KobraOS**, Anycubic's version of Klipper. Input shaping and pressure advance remove ghosting and echo artifacts, so print quality holds up at higher speeds.

## ACE Pro Multicolor Printing

The ACE Pro is the main reason to buy a Kobra 3. It holds **4 spools** and feeds them through Bowden tubes to the hotend for multicolor prints. Add a second ACE Pro and you can print **up to 8 colors**.

At each color change, the printer moves the hotend to the left side, where a lever cuts the filament. It retracts the old color, extrudes the new one until the old color is purged, and then a magnetic, spring-loaded wiper flings the purged filament off to the side.

The ACE Pro in this combo is the same unit that ships with the [Kobra 3 Max](https://www.hoffman.engineering/blog/anycubic-kobra-3-max-hands-on-huge-volume-8-colors/). It differs slightly from the original Kobra 3's version: there are subtle molding changes, no seal surfaces on the back or sides, and the lid has screw holes but not the extra spool guides of the Kobra S1's model.

## ACE Pro Filament Dryer, Backup and RFID

The ACE Pro doubles as a **filament dryer**. You set a temperature from 35 to 55°C and a time from 2 to 24 hours. My thermal camera showed the fans pushing warm air up and around every spool, including the ones not in use. Set to 45°C, the hottest spot was only 47°C, and nothing overheated.

The **filament backup** feature is my favorite. When a spool runs out, the ACE Pro switches to another spool of the same material and color and keeps printing. You can use up every last bit of a roll without babysitting it.

You can use any brand of filament, but the ACE Pro reads the RFID tags on Anycubic's own spools and sets the material type and color automatically. Community projects such as DnG-Craft's let you program your own RFID tags.

## Assembly and First Setup

The Kobra 3 V2 arrives mostly assembled. You screw on the hotend, the screen and the wiper mechanism, plug in a few cables and route the Bowden tubes from the ACE Pro. It took me about **20 minutes** to reach the initial setup.

On first boot, the printer runs a self-check and auto-calibration. It levels the bed and runs a vibration sweep to tune input shaping. It was one of the smoothest unboxings I've had, and I was printing in no time.

## Anycubic Slicer Next, Camera and App

The V2 works best with **Anycubic Slicer Next**, Anycubic's fork of OrcaSlicer, with built-in profiles for most of their printers and materials. Once the printer is on Wi-Fi, scanning a QR code binds it to your Anycubic cloud account, and you can send jobs and monitor prints remotely.

Multicolor setup is easy. You can sync filament from the ACE Pro, customize colors, and paint colors onto any model. I painted an old 3D scan of myself and had a multicolor bust in no time.

A newer feature lets you set purge amounts per color pair. White to black needs little purge, while black back to white needs a lot. The cap is **900 cubic millimeters**, which wasn't enough for my heavily pigmented Sunlu black going to beige. Still, the defaults did well, and waste was much lower than on the original Kobra 3 and the Kobra S1's default.

The included **720p camera** needs a mount you print from a pre-sliced file. Timelapses work but aren't pretty, and the live view runs at single-digit frame rates. The mobile app is better: it sends push notifications for tangles, brittle filament breaks and finished prints.

## Avoid Arachne Wall Generation in Anycubic Slicer Next

The default profiles use classic wall generation, and there's a reason. Arachne, which varies wall thickness to fill gaps, produced bad layer lines in my testing. A two-color cube sliced with classic walls looked fine, but switching to Arachne showed two bad layer artifacts right in the preview. The same thing happened on one of my dice towers, and it happened on my Kobra S1 too, so it's a slicer bug, not a printer problem.

Until Anycubic fixes it, stick with **classic wall generation**.

## Kobra 3 V2 Print Quality: Benchy Speed Test

The printer includes 12-minute and 15-minute Benchy files. The 12-minute Benchy finished and showed off the speed, but it was rough. The 15-minute version was much better, with some stringing.

A standard-speed Benchy I sliced myself took **45 minutes** and came out perfect, with consistent layers and great bridging. So pushing for every bit of the 600mm/s rating won't give you the best results, but slowing down a little makes a dramatic difference while staying very fast.

The included flexible shark also turned out well, with consistent layers and a smooth top surface. You can spot tiny gaps on the inside corners of the top, a sign the profile isn't using Arachne.

## Multicolor Test Prints

A **two-color Benchy** came out great, with no color mixing and clean trim on the cabin. It weighed 11 grams and produced **94 grams** of purge waste. The original Kobra 3 made 118 grams for the same print, so the V2 saved 24 grams.

The **4-color Eevees** were excellent. Purge waste depends on the number of color changes and layers, not on how many copies you print, so filling the build plate makes sense. The only flaw was the whites of the eyes, which came out mostly gray after black.

That black-to-light problem showed up even more on a **Fuecoco** print. The heavily pigmented Sunlu black didn't purge cleanly into red or white, and the bleeding spoiled an otherwise good print. My **bust** had the same problem until I canceled it, swapped the black for brown, and reprinted. That version turned out great.

## Large Prints: Busts and Dice Towers

A **Captain America bust** in [Sunlu High Speed PLA Marble](https://store.sunlu.com/products/high-speed-pla-marble-3d-printer-filament-1kg?_pos=1&_sid=8fdc65e42&_ss=r&variant=49959995179290&sca_ref=6509515.9CIaM1NpXK&sca_source=kobrav2) looked incredible. The sloped sides and back were smooth, and input shaping kept ringing away from the hard edges.

The Desert Kiss dice tower turned out great apart from the obvious Arachne layers. Ignore those and the rest is smooth, with 0.16mm layer lines that look excellent.

A second dice tower, full of overhangs and separate pillars, also looked excellent. There was slight stringing between a few pillars, but it's another strong result.

## Pricing at Recording

At recording, the Kobra 3 V2 Combo was on sale for **$399**, printer and ACE Pro together. That was cheaper than I paid to preorder the original Kobra 3 Combo, and it made the V2 the cheapest multicolor bed-slinger available, below both the Creality Hi Combo and the Bambu Lab A1 Combo at that time.

The 8-color combo was **$678**. A standalone ACE Pro sold for **$289**, so buying the 8-color combo up front saved only about $10 over adding a second ACE Pro later.

Anycubic no longer sells the Kobra 3 V2, so these prices are history now.

## Verdict: Should You Buy the Anycubic Kobra 3 V2 Combo?

Anycubic took a year of feedback and turned it into real hardware and software improvements. My experience with the original Kobra 3 was good, and the V2 matched it. Twenty minutes from box to first print, perfect first layers, and high-quality results across a month of tests.

The ACE Pro is what made the combo worth it. Four colors or materials in one print opens up a new kind of 3D printing, and the dryer and filament backup make repeat prints easier. I also like that Anycubic keeps adding features like object skip and per-filament purge amounts, and backports them to original Kobra 3 owners. The Arachne wall bug and the weak camera feed are the kinks I'd want fixed, and heavily pigmented blacks need careful color choices.

At $399, it was an excellent entry-level printer for anyone who wanted modern features and easy multicolor printing. But Anycubic no longer sells the Kobra 3 V2, so you can't buy one new from them today. Its replacement is the [Anycubic Kobra 4 Combo](https://us.anycubic3d.com/products/kobra-4-combo-3d-printer?ref=hoffmanengineering&utm_source=goaffpro), and code **HOFFENG** takes $15 off it at checkout.

## Pros and cons

### Pros

- At $399 at recording, the combo with the ACE Pro undercut both the Bambu Lab A1 Combo and Creality Hi Combo
- About 20 minutes from unboxing to the first print, with an automatic self-check and input shaping calibration
- LeviQ 3.0 leveling gave perfect first layers on every test print with no Z-offset tweaking
- ACE Pro filament backup switches to a matching spool automatically when one runs out
- Built-in ACE Pro dryer held temperature well, hottest spot 47°C at a 45°C setting
- Less purge waste than the original Kobra 3. A two-color Benchy made 94g of waste vs 118g
- Upgraded nozzle and a wider 60mm Y-axis rail address common complaints about the original
- Software upgrades are being backported to the original Kobra 3

### Cons

- Arachne wall generation in Anycubic Slicer Next caused bad layer lines. Stick with classic walls
- Purge is capped at 900 cubic millimeters, not enough for a heavily pigmented black going to white or beige
- Camera mount must be printed, and the live view runs at single-digit frame rates
- Standard brass nozzle, so be careful with abrasive filaments
- Touchscreen has poor side-to-side viewing angles
- Regional bed leveling was announced but not available to test at review time
- No longer sold by Anycubic

## Specs

| Spec | Value |
| --- | --- |
| Build Volume | 255 x 255 x 260mm (after Anycubic's software update) |
| Max Print Speed | 600mm/s (rated; the 45-minute standard Benchy looked far better than the 12-minute one) |
| Hotend | 300°C max, 0.4mm brass nozzle |
| Bed | Magnetic double-sided textured PEI spring steel, up to 110°C |
| Bed Leveling | LeviQ 3.0 auto leveling with automatic Z-offset |
| Firmware | KobraOS (Klipper-based), input shaping and pressure advance |
| Multicolor | ACE Pro, 4 colors (8 with a second ACE Pro) |
| Filament Drying | ACE Pro heater, 35 to 55°C for 2 to 24 hours |
| Enclosure | None (open bed-slinger) |
| Screen | 4.3-inch color touchscreen, tilting |
| Connectivity | Wi-Fi with Anycubic cloud, USB, 720p camera |

## Where to buy

- [Anycubic Kobra 4 Combo (Anycubic store)](https://us.anycubic3d.com/products/kobra-4-combo-3d-printer?ref=hoffmanengineering&utm_source=goaffpro)
- [Anycubic Kobra S1 Combo (Anycubic store)](https://us.anycubic3d.com/products/kobra-s1-combo?ref=hoffmanengineering&utm_source=goaffpro)
- [Anycubic Kobra 3 Combo (Amazon)](https://amzn.to/4hBYIqI)
- [Anycubic Kobra 3 Max V2 Combo (Anycubic store)](https://us.anycubic3d.com/products/kobra-3-max-v2-combo-3d-printer?ref=hoffmanengineering&utm_source=goaffpro)

Prices may have changed since this review.

## FAQ

### Is the Anycubic Kobra 3 V2 Combo worth it?

At the $399 it sold for at recording, yes. It was fast to set up, printed high-quality results across a month of testing, and the ACE Pro made 4-color printing easy. Anycubic has since stopped selling it, though.

### Is the Kobra 3 V2 Combo cheaper than the Bambu Lab A1 Combo?

It was at the time of recording. At $399 for the printer and an ACE Pro, the Kobra 3 V2 Combo was the cheapest multicolor bed-slinger available, below both the Bambu Lab A1 Combo and the Creality Hi Combo. The review compared prices only; it didn't test the A1 side by side.

### How many colors can the Kobra 3 V2 print?

Four with one ACE Pro, or up to eight with two ACE Pros connected. The 8-color combo was $678 at recording, while a standalone ACE Pro was $289.

### What changed from the original Kobra 3?

The V2 gets the Kobra S1-style nozzle to fix the leaky nozzle complaint, and a Y-axis rail that grew from 40mm to 60mm wide. Software changes add 5mm in X and Y for a 255 x 255 x 260mm build volume, and many of the software upgrades are coming to the original Kobra 3 too.

### Is the Anycubic Kobra 3 V2 still sold?

No. Anycubic no longer sells the Kobra 3 V2, so the $399 combo price from the review is no longer available.

---

This Anycubic Kobra 3 V2 Combo was provided by Anycubic for review, and Sunlu provided the filament used in testing. This post contains affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. All opinions are my own.
