# ComMarker B6 60W MOPA Review: Deep Brass and Color Steel

ComMarker B6 60W MOPA review after a month of testing, from deep engraving brass coins to 25 colors on stainless steel. See the settings, results and prices.

- Author: Chris Hoffman (Hoffman Engineering)
- Published: 2025-05-07
- Category: Lasers
- Video: https://www.youtube.com/watch?v=5vNLNEEdtqc
- Web page: https://www.hoffman.engineering/blog/commarker-b6-60w-mopa-review-deep-brass-and-color-steel/

## Summary

- Product: ComMarker B6 60W MOPA
- Price: $3,599 at time of review
- Verdict: A compact 60W MOPA fiber laser that handled every material I tested, with fast autofocus and a split or all-in-one layout. It fits a small business that wants a fully featured MOPA fiber laser, especially one working with metals.

The **ComMarker B6 60W MOPA** is ComMarker's flagship fiber laser, and I spent a month putting it through its paces: aluminum business cards at 6,000mm/s, sheet metal cutting, deep engraved 2mm brass coins and rainbow colors on stainless steel. This ComMarker B6 MOPA review covers the specs, autofocus, software, settings and results on every material I tested, plus what each bundle costs today.

## ComMarker B6 MOPA Specs and Laser Source

The B6 comes in non-MOPA and MOPA versions, and in **60W**, **30W** and **20W** power levels. The 60W MOPA I tested is the top model. The lower power versions have the same features with a smaller laser source.

It's a **1064nm infrared fiber laser**. That wavelength works on nearly all metals and plastics, and on natural materials like leather, stone and ceramics. It won't work on wood or on transparent materials such as glass and clear acrylic.

A pair of galvo mirrors steers the beam at up to **15,000mm/s**. Most of my aluminum card engraving ran at 6,000mm/s, and the B6 kept up without trouble.

The 60W JPT MOPA source has plenty of power for cutting sheet metal and deep engraving solid metal. The brass coins were the most fun: the B6 ate through 2mm brass in a little over an hour.

## Pulse Frequency and What MOPA Adds

Every fiber laser is pulsed, firing thousands or millions of times per second. The B6 MOPA runs from **1 to 4,000 kHz**, and that wide range lets you match the frequency to each material.

MOPA stands for Master Oscillator Power Amplifier. It gives you control over the shape of each pulse, down to the nanosecond, and it holds peak power across a wide range of frequencies. Non-MOPA fiber lasers struggle with that at high frequencies.

In practice that means one more setting to tune per material, and it's what makes vivid multicolor marks on stainless steel possible.

## Split Design, Size and Work Area

The B6 has a 2-in-1 modular design. You can run it as one integrated unit, or split it so the laser source sits apart from the laser head. That lets you place it where it works best in your shop for space, ventilation or access.

I preferred the all-in-one layout. Everything stays in one spot and my fume extractor had plenty of room. In that layout it measures **430 x 245 x 550mm** and weighs **13.5kg (30 lbs)**.

The included lens gives a **150 x 150mm** work area. I never felt limited by it, and a 300 x 300mm field lens is available if you need more. The base has a grid of holes spaced 25mm apart, and the included alignment bars use it to build a jig for batch jobs.

Parts up to 150mm tall fit normally. The included riser adds another 150mm, which helps with tall objects and the optional rotary attachments.

## Controls, Autofocus and Red Laser Preview

The front has an emergency stop latch, the power button, an LED light bar and up and down buttons for the laser head. Around back are the power input, connectors for the rotary, foot pedal and enclosure, a USB Type-B data port for your computer, and a USB-C port for the motorized lifting stand.

**One-touch autofocus** is the big quality of life feature. Put your material on the autofocus dot, tap Auto on the touch screen, and the B6 measures the distance and moves the head to the focal point. It consistently landed within a tenth of a millimeter, and reflective metals and matte plastics never threw it off.

ComMarker ships a detailed calibration sheet with each laser, listing the focal distance, tested wavelength and frequency. Mine had a 256mm focal distance, and the touch screen settings show both the set distance and a live reading.

The **in-line red laser** shines through the galvo and lens to trace your design. In LightBurn you can outline the bounding box, the outer contour or every shape. Unlike some fiber lasers I've tested, the B6's red laser was easy to see from any angle.

## Foot Pedal and Batch Jobs

Once your material is lined up, the included foot pedal starts the job, so you don't have to walk back to the computer. For batches like my aluminum business cards, I'd finish one, swap the card and step on the pedal for the next.

Put the pedal somewhere it can't get stepped on by accident.

## Optional Accessories

ComMarker sells several rotary attachments for round and cylindrical parts, a [safety shield](https://store.commarker.com/products/laser-safety-face-shields?ref=hoffeng) for the front and sides, and a full enclosure. They also sell fume extractors like the [100W fume extractor](https://store.commarker.com/products/commarker-fume-extractor-100w?ref=hoffeng). I used my own extractor for testing, but I strongly recommend one: a 60W laser makes a lot of smoke, fumes and particles.

## Packaging and Assembly

The B6 arrives in a sturdy printed retail box, with each component boxed and labeled inside. Assembly takes a few bolts to mount the laser head on the lifting stand and the stand on the base.

For the split layout, you're done at that point. For the all-in-one layout, four more bolts join the two pieces. Mine didn't want to start threading. I got all four in without cross threading, but take your time with them.

## Software: EzCad2 and LightBurn

The B6 works with **EzCad2** and **LightBurn**. EzCad2 is on the included USB stick along with the factory calibration files, so launching it from the stick loads the right config for your laser. It's functional and not hard to get running, but it's rough around the edges and the English translation isn't perfect.

LightBurn is my preferred program, and the B6 MOPA works well with it. You need a **LightBurn Pro** license for fiber lasers, which I think is worth the cost.

LightBurn can import the EzCad2 config file, but it brought the field size in as 175mm instead of 150mm. That threw the scaling off, and a 7cm ruler came out closer to 8cm. Setting the size back to 150 x 150mm fixed it.

LightBurn's material test pattern makes dialing in settings easy, and on a MOPA you can vary the q-pulse duration in the test too.

The EzCad2 and LightBurn drivers conflict, so switching programs means uninstalling and reinstalling the right driver. LightBurn has a help page that walks you through it.

## Laser Safety and Fumes

Know which materials are laser safe before you start. Some give off noxious fumes that can hurt you or the machine. The B6's manual only says not to engrave materials with unknown properties. That's good advice, but I'd like to see it warn about specific materials, like PVC, which releases chlorine gas.

## Coated Aluminum Engraving Settings

The B6 removed the coating cleanly and exposed the bright aluminum underneath. My most consistent settings were:

| Setting | Value |
|---|---|
| Speed | 6,000mm/s |
| Power | 50% |
| Frequency | 50 kHz |
| Q-pulse duration | 200ns |

Different colors react differently, but those settings were a good middle ground across the most colors. The Spider-Man design included on the USB drive came out very clean.

## Cutting Aluminum and Stainless Steel

The B6 cut through 0.2mm aluminum cards at 90% power and 50mm/s, using LightBurn's wobble setting.

I also bought stainless steel sheet in a few thicknesses. The 60W B6 MOPA easily cut 0.004in (0.1mm) steel. At 0.01in (0.3mm) it started to struggle, and the heat warped the sheet out of the focal area before it finished.

## Deep Engraving Brass Coins

Deep engraving solid brass coins with LightBurn's 3D Slice feature is where the 60W source stands out. The spider coin took about two hours, and I set it too deep: it cut all the way through the 2mm coin.

These coins have had no cleanup. They're straight off the laser. I plan to try different ways of cleaning and polishing them in a future video. I used ComMarker's [solid brass coin blanks](https://store.commarker.com/products/blank-3mm-metal-coin-with-acrylic-protection-box-for-fiber-laser-engraver-20-pieces?ref=hoffeng).

## Color Marking on Stainless Steel

This is where MOPA earns its place. By varying power, speed, line interval, frequency and pulse duration, you can grow colored oxides on stainless steel. ComMarker includes a color test pattern on the USB stick with the settings for **25 colors**.

My results were more consistent when I defocused the laser by raising it 2mm.

## Dark Acrylic, Plastics and Leather

The B6 left a bright white mark on black acrylic. 3D Print Log keychains and the fine marks on a ruler came out great. This is engraving only, though: don't expect to cut acrylic with it.

Photo engraving on black acrylic was harder to dial in. I was running at 10% power, and it needs more testing for a perfect picture.

Dark plastics work well too. A part 3D printed in dark navy matte PLA got crisp white marks. The darker the plastic, the better it absorbs the infrared beam, so lighter colors won't mark as cleanly.

Dark leather engraved cleanly with a gold look. Lighter leather, like lighter plastic, doesn't work as well.

## Engraving Slate and Stone

Stone and ceramics are excellent on the B6. Slate is still one of my favorite materials, and the 60W MOPA engraved my [slate coasters](https://link.amazon/B0fNX22m4) deep enough to get a 3D effect in a few passes.

## ComMarker B6 MOPA Price and Bundles

When I recorded the review, the 60W MOPA Basic Bundle was on sale for $4,319, the Rotary Bundle I tested was $4,527, and the Ultimate Bundle was $5,135. ComMarker has since dropped the prices. On the ComMarker store today the 60W MOPA bundles are:

| Bundle | Price |
|---|---|
| Basic | $3,599 |
| Rotary | $3,859 |
| Safety (fume extractor and safety shield) | $3,979 |
| Ultimate (rotary, fume extractor and full enclosure) | $4,466 |

The Safety Bundle is the one I recommend. A fume extractor protects your lungs and the machine, even in a well ventilated space. If you don't need 60W, the [30W and 20W B6 MOPA](https://store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver?ref=hoffeng) Basic Bundles are $2,899 and $2,459. If you don't need MOPA at all, there's also the non-MOPA [B6 fiber laser](https://store.commarker.com/products/b6-metal-fiber-laser-engraver?ref=hoffeng).

## Verdict: Should You Buy the ComMarker B6 60W MOPA?

The ComMarker B6 MOPA is a compact fiber laser that packs a punch. The split or all-in-one layout lets you fit it anywhere in your shop, setup was quick, and the detailed calibration paperwork showed the machine had been tested at the factory. I had no issues during any of my tests.

The results were the highlight. It handled every material I tried with crisp, clear marks, and the deep engraved brass coins were my favorite. Autofocus was fast and always on point, and the foot pedal made batch work easy. The rough spots are on the software side: EzCad2's polish, the driver swap between programs, and a field size you'll need to fix after importing into LightBurn.

Go for the 60W if you work mostly with metals, where more power helps. If you work mostly with plastics and other polymers, the 30W or 20W version gives you the same features for less. Compared with other 60W MOPA fiber lasers, the B6 is one of the more affordable options, and the Safety Bundle is good value for money. For a small business that wants a fully featured MOPA fiber laser, I strongly recommend it.

[Check the latest price at ComMarker](https://store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver?ref=hoffeng)

## Pros and cons

### Pros

- 60W MOPA source deep engraves solid brass and cuts thin sheet metal
- Wide 1 to 4,000 kHz frequency range plus pulse duration control for fine tuning
- 25 colors on stainless steel from ComMarker's included color test pattern
- Fast one-touch autofocus that landed within a tenth of a millimeter on every material
- Runs as a compact all-in-one unit or as a split laser source and head
- In-line red laser preview is visible from all angles
- Foot pedal makes batch jobs quick
- Detailed factory calibration sheet, and no issues during any test
- Included riser adds 150mm of height for tall parts and rotaries

### Cons

- EzCad2 is rough around the edges and its English localization isn't perfect
- EzCad2 and LightBurn drivers conflict, so switching programs means swapping drivers
- LightBurn imported a 175mm field size that had to be set back to 150mm by hand
- The four bolts joining the two halves were hard to start threading
- Manual's safety section doesn't warn about specific materials like PVC
- 0.3mm stainless steel warped out of focus before the cut finished
- Fume extractor isn't in the basic bundle, and LightBurn needs a Pro license for fiber lasers

## Specs

| Spec | Value |
| --- | --- |
| Laser Source | 60W JPT MOPA fiber (20W and 30W versions available) |
| Wavelength | 1064nm infrared |
| Pulse Frequency | 1 to 4,000 kHz |
| Work Area | 150 x 150mm with the included lens (300 x 300mm lens optional) |
| Max Speed | 15,000mm/s rated (6,000mm/s used for most aluminum card engraving) |
| Max Object Height | 150mm, plus 150mm with the included riser |
| Focus | One-touch autofocus, within a tenth of a millimeter in testing |
| Dimensions (All-in-One) | 430 x 245 x 550mm |
| Weight | 13.5kg (30 lbs) |
| Software | EzCad2 (included) and LightBurn Pro |
| Connectivity | USB Type-B to your computer |

## Where to buy

- [ComMarker B6 60W MOPA (Basic Bundle)](https://store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver?ref=hoffeng): $3,599
- [ComMarker B6 60W MOPA (Rotary Bundle)](https://store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver?ref=hoffeng): $3,859
- [ComMarker B6 60W MOPA (Safety Bundle, Fume Extractor and Safety Shield)](https://store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver?ref=hoffeng): $3,979
- [ComMarker B6 60W MOPA (Ultimate Bundle, Rotary, Fume Extractor and Enclosure)](https://store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver?ref=hoffeng): $4,466
- [ComMarker B6 MOPA 30W](https://store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver?ref=hoffeng): $2,899
- [ComMarker B6 MOPA 20W](https://store.commarker.com/products/b6-jpt-mopa-fiber-laser-engraver?ref=hoffeng): $2,459
- [ComMarker B6 Fiber Laser (non-MOPA)](https://store.commarker.com/products/b6-metal-fiber-laser-engraver?ref=hoffeng)
- [ComMarker 100W Fume Extractor](https://store.commarker.com/products/commarker-fume-extractor-100w?ref=hoffeng): $359
- [ComMarker Safety Shield](https://store.commarker.com/products/laser-safety-face-shields?ref=hoffeng): $89
- [Brass Coin Blanks (Solid, 20 pieces)](https://store.commarker.com/products/blank-3mm-metal-coin-with-acrylic-protection-box-for-fiber-laser-engraver-20-pieces?ref=hoffeng): $42

Prices may have changed since this review.

## FAQ

### Is the ComMarker B6 60W MOPA a good fiber laser for a small business?

In a month of testing it handled every material I tried, from coated aluminum business cards to deep engraved brass coins, slate and dark plastics, with no machine issues. Its autofocus, foot pedal and alignment grid make batch jobs quick, which is what a small shop needs. It's my recommendation for a small business looking for a fully featured MOPA fiber laser.

### Can the ComMarker B6 MOPA cut metal?

Yes, thin sheet metal. It cut 0.2mm aluminum cards at 90% power and 50mm/s with LightBurn's wobble setting, and 0.1mm stainless steel easily. At 0.3mm stainless, the heat warped the sheet out of the focal area before the cut was done.

### What is the difference between a MOPA and a non-MOPA fiber laser?

MOPA stands for Master Oscillator Power Amplifier. It lets you adjust the pulse duration down to the nanosecond, and it holds peak power across a wide range of frequencies, where non-MOPA fiber lasers struggle at high frequencies. That extra control is what produces vibrant color marks on stainless steel.

### Does the ComMarker B6 work with LightBurn?

Yes. You need a LightBurn Pro license for fiber lasers. LightBurn can import the EzCad2 configuration file from the included USB stick, but check the field size afterward. Mine came in as 175mm and had to be set back to 150mm for the scaling to be correct.

### What materials can the ComMarker B6 MOPA engrave?

Nearly all metals and plastics, plus leather, stone and ceramics. Dark acrylic, dark plastics and dark leather mark best, because darker colors absorb the 1064nm infrared beam better. It doesn't work on wood or on transparent materials like glass and clear acrylic.

---

This ComMarker B6 was provided by ComMarker for review. ComMarker didn't pay for this review. This post contains affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. All opinions are my own.
