# ComMarker Omni X UV Laser Review: 3D Engraving Inside Glass

ComMarker Omni X review: a month with the enclosed 6W UV laser, from 3D engraving inside glass to metal, wood and leather. See the results and current price.

- Author: Chris Hoffman (Hoffman Engineering)
- Published: 2026-04-27
- Category: Lasers
- Video: https://www.youtube.com/watch?v=_O6VYrt_jzM
- Web page: https://www.hoffman.engineering/blog/commarker-omni-x-uv-laser-review-3d-engraving-inside-glass/

## Summary

- Product: ComMarker Omni X
- Price: $3,399 at time of review
- Discount code: christopherhoff (5% off at ComMarker)
- Verdict: An enclosed, Class 1 UV laser for makers and small businesses who want one machine for glass, metal, wood, acrylic and leather, plus 3D engraving inside crystal. The 6W version's 150 x 150mm work area is the main thing to weigh.

A fully three-dimensional sculpture, sitting inside a solid block of glass, with the surface untouched. That's the party trick of the **ComMarker Omni X**, an enclosed, Class 1 UV laser engraver that also works on metal, wood, leather, acrylic and stone. This ComMarker Omni X review covers a month of testing with the **6W version**, including the laser module that failed along the way and how ComMarker handled it.

## How the Omni X UV Laser Works

The Omni X uses a **355 nanometer ultraviolet laser**. Fiber lasers run in the infrared at 1064 nanometers, and CO2 lasers sit way out at 10,600 nanometers. Diode lasers use visible blue light.

Why does that matter? UV light carries much higher energy, so it can break molecular bonds directly instead of burning through the material with heat. ComMarker calls this ZeroBurn technology. In practice, engravings come out clean, with almost no charring, melting or heat damage around the edges.

That makes a UV laser a good fit for heat-sensitive materials that other lasers tend to scorch, warp or discolor. It also covers a wide range of materials in one machine: metals, plastics, glass, ceramics, leather, wood and stone.

## Galvo Speed, Dual Lenses and Work Area

Instead of moving the whole laser head, the Omni X steers the beam with galvo mirrors. That's how it reaches engraving speeds of up to **10,000mm/s**. ComMarker claims a spot size of 0.0019mm and positioning accuracy down to 0.001mm.

Two lenses come in the box. The standard 150 x 150mm lens is the everyday one for most engraving and general cutting. The 70 x 70mm lens has a tighter focus for photo engraving, fine artwork and internal glass work.

The work area is the big trade-off. The 6W version gives you **150 x 150mm**, which suits keychains, business cards, coasters and detailed pieces. It's limiting for larger panels or batch production. The 12W version has a native 250 x 250mm area along with more cutting power.

The machine itself is not small. It measures about 515mm wide, 320mm deep and 655mm tall, and weighs roughly 32kg. Pick a spot for it and plan to leave it there.

## Class 1 Enclosure and LiDAR Autofocus

The Omni X ships fully enclosed as standard. The enclosure's OD 5+ shield blocks UV light, so you can run the machine without laser safety goggles during normal use. That earns it a **Class 1 laser rating**. A cover sensor pauses the laser if you open the enclosure mid-job, built-in temperature monitoring guards against overheating, and there's an emergency stop button on the front.

Focusing is handled by **LiDAR autofocus**. Place your material, hit autofocus in the software, and the head moves to the right height. It worked on every material I tried, from reflective metals to dark plastics. It also accounts for whichever lens you've selected, so there's no recalibrating after a lens swap. For manual tweaks, you get Z-axis buttons on the front panel and a knob on top.

The front panel also holds the power switch. Around back are the USB port and the exhaust port, and the machine connects over Wi-Fi too. An included foot switch starts a job hands-free, which is handy for batch work.

## Assembly, Framing and Noise

The Omni X arrives partially assembled in a large, heavy box. Setup took me about **45 minutes** working alone. You mount the Z-axis assembly to the base, attach the laser head, connect a few internal cables, then secure the enclosure frame and safety shield. None of it is complicated, but the weight makes handling and alignment a bit of work. Once it's together, there's no flex anywhere.

In the box you get safety goggles, a lifting table, the foot switch, a Preview Helper, two crystal blocks, and a materials kit with wood, acrylic, fabric and metal samples.

The Preview Helper is a green acrylic sheet. The UV beam is nearly invisible, so you run a low-power preview on the sheet to see where the design will land. It works, but you have to place and remove the sheet, and it's easy to bump your material and lose your alignment while doing it.

It's also a noisy machine. Almost all of the noise comes from the cooling fans at the top of the laser module, and I measured **70 decibels** from a foot away.

## Software: ComMarker Studio and LightBurn

**ComMarker Studio** is ComMarker's own software for the Omni series, and it's built to get you engraving quickly. It has material presets, an AI-assisted tool that prepares photos for engraving, and the 3D slicing used for internal glass work. It runs on Windows, macOS and mobile devices, over USB or Wi-Fi.

The Omni X is also compatible with **LightBurn**. You'll need the LightBurn Galvo license, an additional $200. Choose BSLFiber in the device setup, then configure the galvo settings and set the laser type to UV.

One difference: ComMarker Studio has the calibration set up by default. In LightBurn you run the galvo correction tool yourself. You engrave a few test patterns and measure the lines, and that corrects the lens distortion so your designs come out square and to scale.

Both worked well for me. ComMarker Studio is the easier start, and LightBurn gives you deeper control over settings.

## 3D Internal Glass Engraving Results

So how does a laser engrave inside something transparent? The UV beam passes through the outer surface and focuses at a point inside the block. At that point the energy is concentrated enough to create a tiny fracture. Move that focal point in three dimensions and you build a complete image inside the glass.

In ComMarker Studio, you import an STL or OBJ model and the software slices it into layers. The machine works through each layer, moving the Z-axis as it goes. The sculptures I made inside the crystal blocks came out with a lot of detail, and the surface stays smooth.

Two things I learned the hard way. I ran these with the 150mm lens, and found out afterward that the 70mm lens is the preferred one for internal engraving. And the crystal blocks are fragile. They chip easily if their edges touch. If you want more of them, ComMarker sells [crystal cubes](https://store.commarker.com/products/100-50-50mm-k9-crystal-cube?ref=hoffeng) separately.

Surface engraving on glass gives a crisp, frosted look with no cracking or chipping. I had to defocus by about **2mm** to get it, otherwise the laser was engraving inside the pane. Cutting is another story. I tried 3mm plate glass and made no progress after 100 passes.

## Metal Engraving Without Marking Compound

Metal surprised me. Even at 6W, the Omni X marks and engraves aluminum, stainless steel, brass and other metals. The coated aluminum business cards ComMarker supplies engrave cleanly at high speeds.

On bare metal, the UV laser leaves a permanent mark through photochemical oxidation. On aluminum I got high-contrast white engravings in a single pass. More passes go a little deeper. After about 10 minutes of continuous engraving on one square, there was a step you could see and feel, measuring about **0.2mm** deep.

Stainless steel oxidizes into colors. I got a wide spread of them, including blues, purples, greens and magentas.

## Wood, Acrylic, Leather and Slate

**Wood** engraves cleanly, with minimal charring or scorching around the edges. Wooden keychains and a bamboo spoon both came out great. Cutting works too. ComMarker rates the 6W version for up to 8mm of basswood in multiple passes, and I ran my own cut tests in 3mm plywood. One thing to know: the galvo mirrors send the beam into the material at an angle, so cuts have a beveled edge, and the angle is more visible toward the edges of the work area.

**Acrylic** is a strong point. The Omni X works on both clear and colored acrylic, and engravings are smooth with good contrast. On black acrylic, the marks came out very white.

**Leather** was one of the best results I've had from any laser I've tested. The low heat means less risk of burning through thin leather, and there's almost no soot or darkening around the engraving.

**Slate** engraved cleanly too. It didn't remove much material, but it left a high-contrast mark on a slate coaster.

## Slide Extension, Rotary and Fume Extraction

The [Slide Extension](https://store.commarker.com/products/commarker-slide-extension?ref=hoffeng) stretches the work area to **150 x 400mm**, more than double the stock space. It let me cut longer continuous designs, like a living hinge, without repositioning the material over and over.

The [R5 rotary](https://store.commarker.com/products/r5-multi-functional-rotary?ref=hoffeng) handles cylindrical objects like tumblers and rings. It integrates with ComMarker Studio, and once it was dialed in, it gave smooth, consistent results on glass vases and bottles.

For fumes, ComMarker rates the enclosure at 99.72% dust isolation when paired with proper fume extraction, and there's a dedicated rear port for an exhaust hose. Treat the enclosure as containment, not as a replacement for air handling. I'd run a [fume extractor](https://store.commarker.com/products/commarker-fume-extractor-100w?ref=hoffeng) or other external extraction, especially with plastics and on longer sessions.

## The Laser Module Failure

One thing went wrong during testing. After a day of use, the engraving output got noticeably weaker. It was subtle at first, then clear that something was off. I compared against my earlier tests and contacted ComMarker support. They diagnosed a faulty laser module and shipped a replacement head.

After the swap, performance went straight back to normal, and the machine has worked perfectly since.

I can't tell you whether that was an isolated defect or a broader quality control issue. I don't have enough information. The Omni X does come with a one-year warranty, and support was responsive.

## Verdict: Should You Buy the ComMarker Omni X?

I love this laser. The ComMarker Omni X brings glass, metal, plastic, wood and leather into a single desktop machine, and the results are consistently clean, with minimal burning or heat damage. Autofocus and the Class 1 enclosure make it easy and safe to run in a workshop.

It makes the most sense if you're a maker or small business owner who works across many materials and wants precise results, and more so if 3D internal glass engraving is something you want to explore. If larger production work is your main goal, the 150 x 150mm area on the 6W version will hold you back, and the Slide Extension or the 12W version is worth the extra cost. Keep the module failure in mind too. It was resolved quickly, but it did happen.

The 6W Omni X was $3,699 when I recorded the video and is $3,399 at the time of writing. The Rotary Bundle is $3,659, the Slider Bundle is $3,899, and the Ultimate Bundle with the rotary attachments, slider and fume extractor is $4,489. The 12W version starts at $5,699. It's still one of the less expensive UV lasers out there, and it includes the enclosure, autofocus and 3D engraving.

[Check the latest price at ComMarker](https://store.commarker.com/products/omni-x-uv-laser-engraver?ref=hoffeng) and use code **christopherhoff** for 5% off.

## Pros and cons

### Pros

- Engraves 3D models inside solid crystal blocks, and two blocks come in the box
- Clean engravings with almost no charring on wood, leather and acrylic
- Marks bare aluminum, stainless steel and brass with no marking compound
- Fully enclosed Class 1 design, so no laser goggles during normal use
- LiDAR autofocus worked on every material tested, from reflective metal to dark plastic
- Works on both clear and colored acrylic
- Works with ComMarker Studio and LightBurn
- ComMarker support diagnosed a faulty laser module and shipped a replacement head

### Cons

- The laser module failed after a day of use and had to be replaced under warranty
- 150 x 150mm work area on the 6W version limits larger panels and batch work
- Large and heavy at roughly 32kg, and assembly took about 45 minutes
- Material is easy to bump when you remove the Preview Helper sheet after framing
- Could not cut 3mm plate glass, even after 100 passes
- Galvo cuts leave a beveled edge, more so near the edges of the work area
- LightBurn needs the $200 Galvo license and a manual galvo correction
- Loud cooling fans, measured at 70 decibels from a foot away

## Specs

| Spec | Value |
| --- | --- |
| Laser Type | 355nm ultraviolet, galvo |
| Laser Power | 6W (tested) or 12W |
| Work Area | 150 x 150mm (6W), 250 x 250mm (12W), 150 x 400mm with the Slide Extension |
| Lenses | 150 x 150mm standard lens and 70 x 70mm high-detail lens, both included |
| Rated Max Speed | Up to 10,000mm/s |
| Spot Size | 0.0019mm (ComMarker's figure) |
| Positioning Accuracy | 0.001mm (ComMarker's figure) |
| Focus | LiDAR autofocus, plus manual Z-axis controls |
| Safety | Class 1 enclosure with OD 5+ shield, cover sensor, emergency stop |
| Software | ComMarker Studio (Windows, macOS, mobile) or LightBurn with the Galvo license |
| Connectivity | USB and Wi-Fi, foot switch included |
| Machine Size | About 515 x 320 x 655mm, roughly 32kg |
| Warranty | One year |

## Where to buy

- [ComMarker Omni X 6W (Basic Bundle)](https://store.commarker.com/products/omni-x-uv-laser-engraver?ref=hoffeng): $3,399
- [Omni X 6W Rotary Bundle (roller and chuck attachments)](https://store.commarker.com/products/omni-x-uv-laser-engraver?ref=hoffeng): $3,659
- [Omni X 6W Slider Bundle](https://store.commarker.com/products/omni-x-uv-laser-engraver?ref=hoffeng): $3,899
- [Omni X 6W Ultimate Bundle (rotary attachments, slider, fume extractor)](https://store.commarker.com/products/omni-x-uv-laser-engraver?ref=hoffeng): $4,489
- [ComMarker Omni X 12W (Basic Bundle)](https://store.commarker.com/products/omni-x-uv-laser-engraver?ref=hoffeng): $5,699
- [ComMarker Slide Extension](https://store.commarker.com/products/commarker-slide-extension?ref=hoffeng)
- [ComMarker R5 Rotary Attachment](https://store.commarker.com/products/r5-multi-functional-rotary?ref=hoffeng)
- [K9 Crystal Cubes for internal engraving](https://store.commarker.com/products/100-50-50mm-k9-crystal-cube?ref=hoffeng)
- [ComMarker 100W Fume Extractor](https://store.commarker.com/products/commarker-fume-extractor-100w?ref=hoffeng)

Use code christopherhoff for 5% off at ComMarker. Prices may have changed since this review.

## FAQ

### Is the ComMarker Omni X worth it?

If you're a maker or small business owner who needs one machine for glass, metal, wood, acrylic and leather, I'd recommend it, and more so if 3D engraving inside glass is on your list. The main thing to weigh is the 150 x 150mm work area on the 6W version. If larger production work is the goal, look at the Slide Extension or the 12W version.

### How does the ComMarker Omni X engrave inside glass?

The UV beam passes through the outer surface and focuses at a point inside the block, where the energy is concentrated enough to create a tiny fracture. ComMarker Studio slices an STL or OBJ model into layers, and the machine moves the Z-axis as it works through each layer to build up the 3D image.

### What materials can the ComMarker Omni X engrave and cut?

In my testing it engraved glass, crystal, aluminum, stainless steel, wood, bamboo, clear and colored acrylic, leather and slate. It cut 3mm plywood, and ComMarker rates the 6W version for up to 8mm of basswood in multiple passes. It did not cut 3mm plate glass, even after 100 passes.

### Do you need laser safety goggles with the ComMarker Omni X?

Not during normal use. The enclosure has an OD 5+ protective shield that blocks UV light, which gives the Omni X a Class 1 laser rating. A cover sensor pauses the laser if the enclosure is opened mid-job. ComMarker still includes a pair of safety goggles in the box.

### Does the ComMarker Omni X work with LightBurn?

Yes. You need the LightBurn Galvo license, which is an additional $200. Select BSLFiber in the device setup, set the laser type to UV, and run the galvo correction tool yourself, since the factory calibration only lives in ComMarker Studio.

---

This ComMarker Omni X was provided by ComMarker for review. This post contains affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. All opinions are my own.
