# Flashforge AD5X Review – Fast, Affordable Multi-Color 3D Printing

Flashforge AD5X review: a fast CoreXY 3D printer with a built-in 4-color Intelligent Filament System, easy setup and great print quality, tested.

- Author: Chris Hoffman (Hoffman Engineering)
- Published: 2025-09-23
- Updated: 2026-11-14
- Category: 3D Printers
- Video: https://www.youtube.com/watch?v=vCoPa41R3vY
- Web page: https://www.hoffman.engineering/blog/flashforge-ad5x-review-fast-affordable-multi-color-3d-printing/

## Summary

- Product: Flashforge AD5X
- Price: $399 at time of review
- Verdict: A compact, fast CoreXY printer whose built-in Intelligent Filament System makes 4-color and multi-material printing simple, with a top-notch setup experience. The main drawback is the 220 mm build height.

Picked as Best overall for beginners in my guide [Best 3D Printers for Beginners, Picked From My Reviews](https://www.hoffman.engineering/guides/best-3d-printers-for-beginners/).

##

The Flashforge AD5X is a CoreXY 3D printer that brings multi-color printing and serious speed to the budget category. With print speeds up to **600mm/s** and Flashforge’s new **Intelligent Filament System (IFS)**, it promises to make 4-color printing simpler and more compact than ever. But how does it actually perform? After spending a month testing it, here’s everything you need to know.

---

## Disclaimer

Flashforge provided this AD5X for review. They did not pay for this review, and all opinions are my own based on hands-on testing. This post contains affiliate links—using them helps support the channel at no additional cost to you.

## Intelligent Filament System (IFS)

The highlight of the AD5X is its **Intelligent Filament System**, or IFS. This setup allows up to **four colors in a single print**, managed through a compact module attached to the side of the printer.

The IFS Host manages filament loading, cutting, and purging automatically. When a color change is needed, the printer cuts the old filament, retracts it using spring-loaded spool holders, then loads and purges the next color before continuing the print.

This system makes multi-color printing much easier—no bulky external boxes or complex feed systems. The results are clean, colorful prints with impressive reliability.

- The **purge chute** sits directly over the power cord, making it a bit tricky to catch waste material without printing an adapter.
- The **auto-retracting spool holders** keep constant tension on the filament, which can cause brittle filaments to crack over time.

## Nozzle & Hotend

The AD5X uses a **direct-drive extruder** with a quick-change 0.4mm brass nozzle. The front cover is magnetic and easily removable for maintenance. Flashforge sells optional nozzles in 0.24mm, 0.4mm, 0.6mm, and 0.8mm sizes, and the hotend is rated for up to **280°C**.

Cooling is handled by a front-mounted fan with balanced airflow around the nozzle, keeping layers smooth and detail crisp.

## CoreXY Motion System

Thanks to its **CoreXY design**, both motion motors remain stationary, allowing for faster acceleration and less vibration. The AD5X supports speeds up to **600mm/s** and accelerations up to **20,000mm/s²**.

I managed to print a **16-minute Speed Benchy**, proving the AD5X can truly reach those advertised speeds—though for best quality, slightly slower speeds are recommended.

## Bed and Print Volume

The AD5X offers a **220 x 220 x 220mm** build volume. While that’s standard for most budget printers, a bit more Z-height would have been nice for larger models.

The bed is a **flexible textured PEI spring steel sheet**, offering excellent adhesion and easy part removal. It also features a **load cell-based leveling system** that automatically detects the nozzle’s contact with the bed for perfect first layers.

## Noise Levels

During printing, the AD5X averaged around **58–60 dB**, peaking at 61 dB. It’s quiet enough for an office or workshop environment.

## Control Panel & Connectivity

The printer features a **4.3-inch full-color touchscreen** with an intuitive layout. Connectivity options include **USB**, **Ethernet**, and **Wi-Fi**.

## Optional Accessories

Flashforge offers several add-ons for the AD5X:

- A **Camera Module** for real-time monitoring and time-lapse creation.
- An **Enclosure Kit** that helps stabilize temperatures and reduce noise by up to 10 dB.

## Assembly Experience

The AD5X arrives **mostly preassembled** and is one of the best-packaged printers I’ve tested. Setup takes about **20 minutes** including Wi-Fi setup, automatic bed leveling, and input shaping calibration.

Each spool holder must be installed in its correct numbered slot, as each retracts at different tension levels. Once assembled, you can start printing almost immediately.

## Software

Flashforge includes **Orca-Flashforge**, their customized fork of Orca Slicer. It includes pre-tuned profiles for the AD5X and makes multi-color setup straightforward.

You can easily assign colors, paint models, and send prints wirelessly to the printer. The only major drawback is the lack of an **estimated purge waste display**, which makes tracking filament usage difficult.

## App

The **Flash Maker** mobile app (iOS/Android) lets you monitor print progress and access the camera feed if installed. However, it doesn’t yet send push notifications for completed or paused prints—something I hope Flashforge adds in the future.

## Print Quality Examples

- 🎧 **Headphone Holder:** Crisp detail and clean 3-color transitions.
- 🛥️ **Dual-Color Benchy:** Excellent print quality with minimal color bleed.
- 🦆 **Donald Duck Figures:** Gorgeous 4-color results with vibrant contrast.
- ⚙️ **Desert Kiss Dice Tower:** Excellent single-color detail and overhangs.
- 🐍 **Flexible Snake:** Perfect adhesion and flexibility using rainbow filament.
- 🧱 **TPU Prints:** Surprisingly smooth results, even in multi-material mode.

## Filament Waste

Like all single-nozzle multi-color printers, the AD5X generates some waste during color changes.

- **3D Benchy:** 11.3g print → 89.8g purge waste
- **Tentacle Holder:** 67.7g print → 46.4g purge waste
- **Donald Ducks:** 150g print → 351g purge waste

While waste is inevitable, the AD5X is actually **more efficient** than many competitors like the Anycubic Kobra S1, which can double that waste.

## Conclusion

The **Flashforge AD5X** offers impressive value at just **$399**. It’s fast, compact, and brings multi-color 3D printing to a more accessible price point.

If you’re looking for an affordable way to step into **multi-color or multi-material 3D printing**, the AD5X is a fantastic option.

## Pricing and Purchase Links

At the time of writing, the Flashforge AD5X starts at **$399 USD**, with bundle options for the enclosure and camera.

If you’re curious how it stacks up against other budget multi-color printers, check out my recent review of the **Anycubic Kobra 3 V2** for a head-to-head comparison.

## Pros and cons

### Pros

- Compact 4-color IFS built into the side of the printer
- Prints at up to 600 mm/s
- Assembled and fully calibrated in about 20 minutes
- Load cell bed gives an impressive first layer
- Quiet, averaging 58 to 60 dB
- Handles TPU and switches between TPU and PLA with no issues

### Cons

- 220 mm build height is a little short
- Purge chute sits directly over the power cord
- Spring-loaded spool holders keep filament under tension, making it more likely to crack or snap
- Orca-Flashforge doesn't estimate the purge amount
- The app doesn't send push notifications

## Specs

| Spec | Value |
| --- | --- |
| Build volume | 220 × 220 × 220 mm |
| Motion system | CoreXY |
| Max print speed | 600 mm/s |
| Max acceleration | 20,000 mm/s² |
| Multi-color | Intelligent Filament System (IFS), up to 4 colors |
| Extruder | Direct drive, quick-change 0.4 mm brass nozzle (0.24, 0.4, 0.6 and 0.8 mm sold separately) |
| Max hotend temperature | 280 °C |
| Build plate | Magnetic, flexible textured PEI spring steel |
| Bed leveling | Load cell, automatic leveling and Z offset |
| Noise | 58 to 60 dB average, 61 dB max |
| Controls | 4.3" full-color touchscreen |
| Connectivity | Wi-Fi, Ethernet, USB |

## Where to buy

- [Flashforge AD5X](https://flashforge.sjv.io/9L6Dd3): $399
- [AD5X Enclosure Combo](https://flashforge.sjv.io/je7060): $438
- [AD5X Camera Combo](https://flashforge.sjv.io/POQEdQ): $431
- [AD5X Enclosure Kit](https://flashforge.sjv.io/55dE0N)
- [AD5X Camera Kit](https://flashforge.sjv.io/kOKE2d)
- [AD5X Nozzle Kit](https://flashforge.sjv.io/GKyJdL)

Prices may have changed since this review.

## Compared with

- [Anycubic Kobra 3 V2 Combo](https://www.hoffman.engineering/blog/anycubic-kobra-3-v2-combo-review-what-changed/) ($399 at review): Build volume 255 × 255 × 260 mm; Rated speed 600 mm/s; Multicolor 4 colors, ACE Pro (up to 8); Benchy 12 min
- [Anycubic Kobra 3 Max](https://www.hoffman.engineering/blog/anycubic-kobra-3-max-hands-on-huge-volume-8-colors/) ($429.99 at review): Build volume 420 × 420 × 500 mm; Rated speed 600 mm/s; Multicolor 4 colors, ACE Pro (up to 8); Benchy 18 min
- [Geeetech A10M](https://www.hoffman.engineering/blog/an-entry-level-dual-extruder-3d-printer-geeetech-a10m-review/) ($299 at review): Build volume 220 × 220 × 260 mm; Multicolor 2 colors, mixing hotend
- [Snapmaker U1](https://www.hoffman.engineering/blog/snapmaker-u1-review-the-new-king-of-3d-printing/) ($849 at review): Build volume 270 × 270 × 270 mm; Rated speed 500 mm/s; Multicolor 4 colors, four toolheads

Full comparison: https://www.hoffman.engineering/compare/3d-printers/

## FAQ

### How much filament does the Flashforge AD5X waste on color changes?

A dual-color 3D Benchy weighed 11.3 g and produced 89.8 g of purge. The tentacle headphone holder weighed 67.7 g with 46.4 g of purge, and two 4-color Donald Duck figures weighed 150 g with 351 g of purge (not counting supports or the prime tower). Purge depends on the number of color changes per layer, so filling the plate with copies of the same print uses filament most efficiently.

### Can the AD5X print at 600 mm/s?

Yes. With the slicer set to 600 mm/s and 20,000 mm/s² accelerations, a 3D Benchy printed in about 16 minutes. For the best balance of speed and quality, stick with the slicer's default profiles at around 300 mm/s.

### Can the AD5X print TPU?

Yes. A TPU 90 printed perfectly, and the IFS switched between TPU and PLA in a multi-material print with no issues.

### How long does the AD5X take to set up?

About 20 minutes from unboxing to the first print, most of it automatic bed leveling and input shaping calibration. The spool holders are numbered and must go in the matching slots, or they won't retract correctly.

## Keep track of your prints with 3D Print Log

I built 3D Print Log to record print time, filament used and cost for every print, with stats for each printer. Klipper printers can log to it automatically, and it’s free to start. [Try 3D Print Log](https://www.3dprintlog.com/?utm_source=hoffman.engineering&utm_medium=blog&utm_campaign=flashforge-ad5x-review-fast-affordable-multi-color-3d-printing)

---

This post contains affiliate links. If you buy through them, I may earn a small commission at no extra cost to you. All opinions are my own.
