# FLSun S1 Pro Review: An 8-Minute Benchy on a Big Delta

FLSun S1 Pro review after a month of testing. A 1200mm/s delta printer with an 8-minute Benchy, 400mm-tall prints and real noise numbers. See who should buy it.

- Author: Chris Hoffman (Hoffman Engineering)
- Published: 2025-01-31
- Category: 3D Printers
- Video: https://www.youtube.com/watch?v=W_381tRPbJM
- Web page: https://www.hoffman.engineering/blog/flsun-s1-pro-review-8-minute-benchy-big-delta/

## Summary

- Product: FLSun S1 Pro
- Price: $799 at time of review
- Discount code: FLSUNHOFENG ($100 off at FLSun US store)
- Verdict: A huge, fast, feature-packed delta printer for makers who have the floor space and can live with 63 to 70 dB of noise. If you need a quiet printer for a shared room, skip it.

The **FLSun S1 Pro** is the largest and fastest 3D printer I've reviewed. It's a delta printer that FLSun rates at **1200mm/s**, and it printed the sample Benchy in 8 minutes and a 400mm-tall statue in 8.5 hours. In this FLSun S1 Pro review I cover the hardware, the noise, the software, and the prints from a month of testing, so you can decide if it belongs in your shop.

## FLSun S1 Pro Size and Build Volume

The first thing you notice is the size. The S1 Pro weighs **41kg (90 lbs)** and stands over a meter (40 inches) tall. You'll want a second person to move it.

Because a delta's arms limit how far the hotend can reach near the top, the build volume is a cylinder that tapers into a cone. The base is **320mm in diameter**, the full-diameter section runs to **383mm**, and the peak is **430mm**. A round bed takes some getting used to, but that height pays off on tall prints, as you'll see below.

FLSun calls it their top-of-the-line printer, and it runs Klipper, which handles the trigonometry a delta needs to place the nozzle.

## Hotend, Extruder and Max Flow Rate

The hotend uses a **ceramic heater rated to 350°C** and a **0.4mm hardened steel nozzle**. PLA and PETG are easy, and the hardware is built for abrasive and high-temperature filaments like carbon fiber or glass fiber blends, polycarbonate and nylon.

On the effector sits a **dual-gear direct drive extruder** for 1.75mm filament, with plenty of grip at high speed. To keep the moving mass low, FLSun mounted the part cooling fan at the top of the printer and runs the air down through a large hose. Cooling was excellent, which matters at these speeds.

FLSun rates the hotend and extruder at **110mm³/s** of volumetric flow. Running flow tests with several high-speed PLAs, I saw the hotend start to struggle around **90mm³/s**. That's still a lot of flow, and it means the printer can reach its top speed often, especially with thinner layers.

## Magnetic PEI Bed and Smart Zone Heating

The 320mm bed uses a **textured magnetic PEI spring steel plate**. Adhesion was great: parts stayed put while printing and popped off with a flex afterwards. Auto bed leveling and automatic nozzle offset gave me a clean first layer every time.

**Smart Zone Heating** splits the bed into an inner and an outer zone. For a small model, only the inner zone heats, which cuts warm-up time and energy use. My thermal camera confirmed that only the center heated up. Larger models heat both zones.

You'll see a scrape across my bed in the video. That was my fault. While tuning a speed Benchy, I pushed the first-layer travel acceleration far too high, and the fast move from the purge line made the nozzle dip into the bed. Nothing else on the printer was damaged.

## Delta Motion: Advantages and Drawbacks

The S1 Pro has three pillars, each with its own motor driving a belted carriage on linear bearings. Pairs of carbon fiber arms link each carriage to the hotend effector, and moving the three carriages up and down positions the nozzle.

Since the motors stay put, the moving parts are light. That's what makes the 1200mm/s rating possible, and with three motors sharing every move, FLSun rates acceleration at up to **40,000mm/s²**. The bed also never moves, which keeps tall parts stable.

The tradeoffs: the math takes more computing power, which modern Klipper boards handle easily. And the effector can tilt slightly if one arm leads or lags the others, which can push the nozzle out of plane. I only saw that at the extreme, with accelerations around 40,000.

## Noise Levels

This is the S1 Pro's biggest weakness. Both the cooling fan and the stepper drivers are loud. It's been years since I heard stepper whine like this; it reminded me of my old [TEVO Tornado](https://www.hoffman.engineering/blog/tevo-tornado-in-depth-review-favorite-entry-level-3d-printer-of-2018/).

FLSun advertises 55 dB and says it's quieter than the original S1, which I haven't used. Standing a couple of feet away with the fan at 100%, I measured **68 to 70 dB with the door open** and **63 to 65 dB with it closed**. FLSun includes a printable "fan silencer" for the fan inlet. It dropped the reading by one or two decibels, but the higher pitch felt more grating to me.

At 65 dB, I found it hard to concentrate in the same room. You can turn the fan down to make it more bearable, at the cost of speed. With a 1200mm/s ceiling, you have some room to slow down.

## Filament Dryer and Spool Weighing

On top of the printer is a filament holder with a **built-in dryer** that heats to 60°C on an adjustable timer, controlled from the Filament tab. Heat comes from vents at the top and wraps around the spool well. A pouch of silica desiccant sits in the holder, and it gets heated whenever the dryer runs, so the desiccant keeps working for a long time.

The holder also weighs the spool to estimate how much filament is left. The touch screen shows it in 25% steps, while the FLSun World app shows 10% steps. It assumes 1kg spools, so 500g or 250g spools will read wrong. I track filament usage in [3D Print Log](https://www.3dprintlog.com) instead.

## Touch Screen, Power Loss Recovery and E-Stop

The **7-inch color touch screen** is one of the best printer UIs I've used: responsive, tidy, and good-looking. Two USB ports and a power button sit on the front. The printer can sleep after a print, and the power button wakes it.

There's a **built-in UPS**. If power cuts out mid-print, it holds on long enough for the arms to lift the hotend clear, and power-loss recovery lets you resume once power returns. The catch is that flipping the main switch won't stop the printer in an emergency. Hold the power button instead; it doubles as the emergency stop and kills power immediately.

## Klipper, Mainsail and Timelapse Limits

The S1 Pro runs **Klipper** and connects over Wi-Fi, so you can manage it from a browser with the **Mainsail** UI: upload G-code, start and stop prints, browse files, and watch the live camera.

Timelapses are where it falls short. You can only enable one when you start a print from the touch screen or the FLSun World app, not from start G-code or the web interface. Since I always want a timelapse, I had to upload remotely, walk to the printer, and start the job by hand.

The **16GB of eMMC** storage holds plenty, and unlike the original S1 it keeps as many timelapses as you want. But you can't browse or download them from the web UI. You have to plug in a USB drive and copy them from the touch screen. The videos themselves look great.

As far as I can tell, there's no full SSH access, so you can't freely install Klipper plugins or updates.

## AI Spaghetti and Debris Detection

The camera also drives "AI" tools for spaghetti and debris detection. They're off by default and labeled beta.

**Spaghetti detection** worked well. I paused prints, knocked off a section, and resumed. After roughly 8 layers, the printer paused with a warning, and I could resume or cancel. On a dice tower, the first attempt failed for real when two parts came loose, and it caught that. On the reprint, it flagged spaghetti a few hours in when there wasn't any. I suspect the gyroid infill confused it.

I couldn't get **debris detection** to trigger at all, even with chunks of failed prints on the bed. These features should improve over time.

## Other Features and Air Filter

The feature list keeps going: filament runout detection, power loss recovery, clog detection, auto bed leveling, input shaping, pressure advance, and over-the-air firmware updates. The enclosure also has an **air filter with HEPA and activated carbon** stages.

## Assembly

The S1 Pro arrives mostly assembled. I screwed on the glass doors and handles and attached the screen, and that was it. The hard part is lifting a 90-pound printer, so have help.

FLSun's wiki has detailed guides for removing and replacing each component, which I'm glad to see.

## FLSunSlicer 2.0 and the FLSun World App

You can use any slicer, but FLSun's own **FLSunSlicer 2.0** is now based on OrcaSlicer (the first version was based on PrusaSlicer). I had a great experience with it. There's one base print profile, a fast 0.2mm profile, with many filament types that adjust speed and cooling. It uploads G-code straight to the printer, and its Device tab shows the Mainsail UI.

Because FLSunSlicer is Slic3r-based, it also works with the 3D Print Log Slic3rPostProcessUploader, which records your print settings, filament usage and print time whenever you save G-code.

The **FLSun World** mobile app shows the live camera, moves and preheats the printer, starts prints, and saves timelapses to the cloud.

## FLSun S1 Pro Print Quality Results

All test filament came from Sunlu, including their [PLA](https://store.sunlu.com/products/over-6kg-of-pla-pla-meta-3d-filaments-1kg-2-2lbs-fit-most-of-fdm-printer?sca_ref=6509515.9CIaM1NpXK&sca_source=tx) and [matte PLA](https://store.sunlu.com/products/over-6kg-bulk-sale-pla-matte-filament-neatly-wound-filament?sca_ref=6509515.9CIaM1NpXK&sca_source=tx).

- **8-minute Benchy:** printed fine on the first try. Some waves on the hull and no readable text on the back, but better than many hour-long Benchys I've printed.
- **Dwarf statue:** smooth base and slopes, a few extrusion artifacts on the armor and hammer, and no ringing or ghosting. Printed in 3 hours 30 minutes.
- **Lighthouse and other samples:** fast and clean, with some visible Z seam and drooping inside the lighthouse's lantern room.
- **Kickstarter-Autodesk torture test:** 55 minutes with the default profile, against about 2 hours in my other reviews. Acceptable, with stringing on the small pillars and some droop on the 15-degree overhang and top platform. The FLSunSlicer profile beat the OrcaSlicer profile by a wide margin at a similar time.
- **Dice guardian dragons at 0.1mm layers:** smooth bodies, with some stringing on the wing tips and ears.
- **Captain America bust at 100% scale:** under 4 hours in marble PLA, and I couldn't find a single defect, chin overhang included.
- **Venus statue at 400mm:** 8.5 hours. One tree support under the ponytail failed; the rest looks excellent.
- **GCreate spaceship at 428mm in spiral vase mode:** no hitches or pauses. Raking light shows a faint salmon-skin texture on flat areas, possibly from the thin walls or from pushing a non-high-speed PLA.
- **Eiffel Tower:** a resin model I scaled as large as the printer allowed. It took 16.5 hours, and the S1 Pro printed the small trusses and even the guard rails. It's the first FDM printer I've tested that could print it at that size.
- **TPU Benchy:** Sunlu Silk TPU on the FLSunSlicer TPU profile, with clean top surfaces and minimal stringing, plus the same faint salmon-skin texture.
- **PETG:** a smooth, consistent test cube and thin-walled Gridfinity holders.

## Verdict: Should You Buy the FLSun S1 Pro?

The S1 Pro lives up to the hype. It's not a big departure from the original S1, but it adds many quality-of-life improvements, and watching it print at full speed is a treat. The speed also makes the big build volume usable: a 400mm statue in 8.5 hours instead of days.

It's a fit if you have a sturdy table, the floor space for a 90-pound, meter-tall machine, and a workspace where noise doesn't matter. Klipper gives it every feature you'd want, FLSunSlicer's profiles are well tuned, and remote control through Mainsail and the FLSun World app worked well. Skip it if the printer shares a room with you: at 63 to 70 dB, it's loud. And if you live on timelapses, the start-from-the-screen and USB-only download limits will bug you.

At recording, the S1 Pro sold for $1,399. FLSun's US store now lists it at **$799**, and code **FLSUNHOFENG** was good for $100 off at the time of the video. [Check the latest price at the FLSun store](https://us.store.flsun3d.com/products/flsun-s1-pro?utm_medium=Youtube&utm_campaign=Hoffman%20Engineering).

## Pros and cons

### Pros

- The fastest printer I've tested, with an 8-minute Benchy from the sample files
- Large 320mm by 430mm delta build volume, used for a 428mm spiral vase print
- Hotend kept up to about 90mm³/s in my flow tests with high-speed PLA
- 350°C hotend and hardened steel nozzle handle carbon fiber, glass fiber, polycarbonate and nylon
- Fast, well-organized 7-inch touch screen, one of the best UIs I've used
- Filament holder with a built-in 60°C dryer and a heated desiccant pouch
- FLSunSlicer 2.0 profiles gave much better results than the OrcaSlicer profiles
- Built-in UPS lifts the hotend clear on power loss and lets you resume the print
- Arrives mostly assembled, and FLSun's wiki documents how to replace each part

### Cons

- Loud. 63 to 65 dB with the door closed and 68 to 70 dB with it open, a couple of feet away
- Timelapses can only be started from the touch screen or the FLSun World app
- Timelapse files can't be browsed or downloaded remotely, only copied to a USB drive
- Very large and heavy at 41kg (90 lbs), so you need help to move it and a sturdy table
- AI spaghetti detection gave one false positive, and I couldn't get debris detection to trigger
- No full SSH access, which limits Klipper plugins and updates
- Spool weight estimate assumes 1kg spools

## Specs

| Spec | Value |
| --- | --- |
| Printer Type | Delta, Klipper firmware |
| Build Volume | 320mm diameter, 430mm max height (383mm full-diameter height) |
| Max Speed | 1200mm/s (rated) |
| Max Acceleration | 40,000mm/s² (rated) |
| Max Volumetric Flow | 110mm³/s rated, about 90mm³/s measured with high-speed PLA |
| Hotend | Ceramic heater, 350°C max, 0.4mm hardened steel nozzle |
| Extruder | Dual-gear direct drive, 1.75mm filament |
| Bed | Textured magnetic PEI spring steel, two-zone heating |
| Enclosure | Yes, with HEPA and activated carbon air filter |
| Screen | 7-inch color touch screen |
| Connectivity | Wi-Fi (Mainsail web UI, FLSun World app), 2x USB |
| Storage | 16GB eMMC |
| Weight and Height | 41kg (90 lbs), over 1 meter (40 in) tall |

## Where to buy

- [FLSun S1 Pro (FLSun US Store)](https://us.store.flsun3d.com/products/flsun-s1-pro?utm_medium=Youtube&utm_campaign=Hoffman%20Engineering): $799
- [FLSun S1 Pro (Amazon US)](https://amzn.to/4hC37ti)

Use code FLSUNHOFENG for $100 off at FLSun US store. Prices may have changed since this review.

## FAQ

### Is the FLSun S1 Pro worth it?

It is if you want to print big parts fast and you have room for a 90-pound printer that stands over a meter tall. It printed a 400mm Venus statue in 8.5 hours and a full-scale Captain America bust in under 4 hours with no visible defects. If you need a quiet printer for a room you work in, the 63 to 70 dB noise level is the main reason to pass.

### How fast does the FLSun S1 Pro print in practice?

FLSun rates it at 1200mm/s with accelerations up to 40,000mm/s². In my testing, the sample Benchy printed in 8 minutes, and the Kickstarter-Autodesk torture test finished in 55 minutes with the FLSun Slicer profile, a test that normally takes about 2 hours in my other reviews. The hotend held up to about 90mm³/s of flow with high-speed PLA, against a rated 110mm³/s.

### How loud is the FLSun S1 Pro?

Standing a couple of feet away with the cooling fan at 100%, I measured 68 to 70 dB with the door open and 63 to 65 dB with it closed. The cooling fan and the stepper motor drivers are both loud. The printable fan silencer took off another one or two decibels but raised the fan's pitch.

### What is the build volume of the FLSun S1 Pro?

As a delta printer, its build volume is a cylinder that tapers to a cone at the top. The base is 320mm in diameter, the full-diameter height is 383mm, and the maximum height is 430mm.

### What materials can the FLSun S1 Pro print?

The 350°C ceramic hotend and 0.4mm hardened steel nozzle handle PLA and PETG and are built for carbon fiber or glass fiber filled filaments, polycarbonate and nylon. I printed PLA, PETG and Sunlu Silk TPU, and the TPU Benchy came out with minimal stringing.

---

This FLSun S1 Pro was provided by FLSun for review, and Sunlu provided the filament used in testing. This post contains affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. All opinions are my own.
