# Gweike G2 Pro Review: 30W Fiber Laser at Half the Weight

Gweike G2 Pro review: a 30W fiber laser that deep engraves brass coins in half the time of the G2, now with LightBurn support. See my metal and plastic tests.

- Author: Chris Hoffman (Hoffman Engineering)
- Published: 2024-10-07
- Category: Lasers
- Video: https://www.youtube.com/watch?v=gtqZw3ZoKFQ
- Web page: https://www.hoffman.engineering/blog/gweike-g2-pro-review-30w-fiber-laser-at-half-the-weight/

## Summary

- Product: Gweike G2 Pro
- Price: $2,899 at time of review
- Discount code: hoffman800 ($200 off at Gweike)
- Verdict: A 30W fiber laser that refines the G2 with 50% more power at about half the weight, a focal pointer that makes focusing trivial and LightBurn support. An excellent choice for engraving almost any metal and dark plastics.

The **Gweike G2 Pro** deep engraved a brass coin in a little over an hour. The same coin took about two hours on the [original Gweike G2](https://www.hoffman.engineering/blog/the-most-affordable-fiber-laser-deep-metal-engraving-color-stainless-steel-and-more-gweike-g2/). It's a **30W fiber laser** with 50% more power than the G2 at about half the weight, plus a new focal pointer and LightBurn support. In this Gweike G2 Pro review I cover the hardware, the software and my tests on metals, plastics, slate and leather.

## 30W Fiber Laser: 50% More Power

The G2 Pro produces a **1064nm infrared beam**. Fiber lasers work on almost all metals (gold, silver, stainless steel) plus dark plastics, leather and stone. Infrared doesn't work on wood or transparent materials like glass and clear acrylic.

Going from the G2's 20W to the G2 Pro's 30W is a game changer. More power means faster engraving and more material removed per pass, which is how that brass coin went from two hours to one.

The machine has two parts. The **Laser Source** generates the beam and sends it through a fiber optic cable to the **Main Engine** on its lifting stand. There, a pair of galvo mirrors redirect the beam down through the focusing lens. The galvos move fast enough for engraving speeds up to **15,000mm/s**.

## Speed, Power and Frequency

The fiber laser is pulsed, so you control both power and pulse frequency. Gweike rates the frequency range at **20 to 200kHz**. Most of Gweike's recommended material settings sit around **1,000mm/s at 30kHz**. Higher frequencies help on some materials, for instance as a cleanup pass on metals.

You can push the speed to 15,000mm/s, but above about **8,000mm/s** I started to see the pulse pattern on the material. Plan to experiment with power, speed and frequency to get the most out of the G2 Pro.

## Red Positioning Laser

An in-line red laser shines through the galvo so the software can trace your design before engraving, either the outer bounds or each shape. Alignment was spot on, unlike the original G2's red laser, which was slightly off. That made positioning material easy.

## Electric or Manual Lift

The Main Engine sits on a lifting stand that raises and lowers it to focus. Like the G2, the G2 Pro comes in two versions:

- **Manual lift** with a **110 x 110mm** work area
- **Electric lift** with a lens that increases the work area to **150 x 150mm**, controlled by up and down buttons on the side

I reviewed the electric lift version.

## Three Ways to Focus the G2 Pro

My favorite change on the G2 Pro is the new **focal pointer**. A small pointer on the head slides along a ruler on the stand, and the number is the distance from the workbench. Engraving 5mm thick material? Move the head until the pointer reads 5mm and you're focused.

The other two methods carry over from the G2. You can measure from the top of your material to the bottom of the Main Engine with the included ruler: the focal length is **211mm** on the manual lift and **261mm** on the electric lift. Or use the red focus dots, moving the head until the in-line red laser and a fixed red dot merge on your material.

## Workbench, Tilt and Handheld Use

The stand has more tricks. The included screws and brackets make a jig for lining up material, useful for batch jobs. If an object is too big for the stand, remove the middle and set the laser right on the object. The Main Engine also tilts for angled surfaces.

With the optional **safety shield**, you can take the Main Engine off the stand and use the G2 Pro handheld. The shield is the correct focal height, so rest it on the surface and engrave. It slides securely into slots on the Main Engine and has a built-in exhaust fan on the back. The drawback is that the fan is USB powered from the Laser Source, and its cable is very short, so it's only usable when the source sits right next to the Main Engine.

## A Smaller, Lighter Laser Source

The cables from the Main Engine run back to the source in a tidy bundle, much nicer than the original G2's mess of wires, and it should help protect the fiber optic cable. The Laser Source is also much smaller and lighter than the G2's. A safety key on the front acts as the power switch, next to a button that enables the laser. The back has power and USB connections for your computer, the electric lift, the shield fan and optional accessories. I love its rounded look; it's elegant and stable.

## Rotary Roller and Chuck

Gweike's optional [roller rotary](https://www.gweikecloud.com/products/g2-roller-rotary?ref=hoffman&variant=44054266249433) and [chuck rotary](https://www.gweikecloud.com/products/g2-chuck-rotary?ref=hoffman&variant=44054377857241) both worked flawlessly for round and cylindrical objects. The chuck comes with several pegs to hold anything from small rings to large cups, and it can be angled.

I engraved the surface of an aluminum can with ease, and on my first attempt cut through the aluminum. It made a very satisfying sound doing it.

## Assembly and Software: GLaser or LightBurn

The G2 Pro needs almost no assembly. Four screws attach the base of the stand, the Main Engine screws onto the stand, and the adhesive pointer sticks to the lift. Plug in the cables and you're ready.

On software, you now have options. Gweike includes **GLaser** on a USB stick. It works great, and the manual walks through the basics and settings. If you prefer **LightBurn**, version 1.7 supports the G2 and G2 Pro, and setup was easy. I had no issues with either. The USB stick had the right configuration files for the G2 Pro but only the original G2 manual. The G2 Pro manual was easy to find on Gweike's website.

## Gweike G2 Pro Test Results

**Anodized aluminum.** The coating comes off easily and the G2 Pro makes very crisp engravings. Text and logos go quickly thanks to the galvo, and photo engraving on black aluminum has gorgeous contrast.

**Brass.** Custom brass coins had about **a millimeter of material removed in a little over an hour**, compared to about 2 hours on the original G2. With LightBurn support, the 3D Slice feature makes 3D designs like a flower or a wizard easy to engrave.

**Stainless steel.** Varying power and frequency produces a whole spectrum of colors: greens, pinks, blues and purples. These are hues I haven't seen from other types of lasers. You can also make deeper, permanent engravings in stainless.

**Dark acrylic.** High contrast white engraving. 3D Print Log keychains look great, and an engraved ruler was almost spot on dimensionally.

**Dark plastics.** A part 3D printed in dark blue PLA took a white engraved label, which opens up accurate, high contrast labels on 3D prints.

**Slate.** The G2 Pro doesn't seem to remove as much material from a slate coaster as a diode laser would, but the engraving is brighter and higher contrast. It also runs much faster than a diode laser, so coasters take a fraction of the time.

**Leather.** Results depend on color. Dark leather engraves well, with fine detail. Lighter leathers didn't engrave at all; they didn't seem to interact with the infrared beam.

The same goes for other materials. Clear materials like glass and clear plastic don't work, although a dark surface treatment might let you mark glass. Wood doesn't work either.

## Verdict: Should You Buy the Gweike G2 Pro?

The Gweike G2 Pro is an excellent fiber laser that refines the original G2: 50% more power at half the weight, plus quality of life features that make your workflow easier. The 30W source engraves faster, which on deep work like brass coins cuts hours off the job. The focal pointer is a simple addition that makes life easier, the safety shield and rotary attachments expand what it can do, and LightBurn support opens up features like 3D engraving.

When I reviewed it, the manual lift version was **$2,599** and the electric lift version with the larger work area was **$2,899**. The safety shield was $99, and the rotary roller and chuck were $130 each. If you want to engrave almost any metal and dark plastics, the G2 Pro is an excellent choice, and it's an upgrade worth paying for over the original G2.

Use code **hoffman800** for $200 off. [Check the latest price at Gweike](https://www.gweikecloud.com/products/g2-pro-fiber-laser-engraver?ref=hoffman&variant=45587415695577).

## Pros and cons

### Pros

- 30W source deep engraved brass coins in a little over an hour, about half the time of the 20W G2
- About half the weight of the original G2, with a smaller laser source and a neater cable bundle
- Focal pointer on the stand makes focusing as easy as matching your material thickness
- In-line red laser alignment is spot on, unlike the slightly off original G2
- LightBurn 1.7 support adds features like 3D Slice engraving, and GLaser is included
- Wide range of stainless steel colors by varying power and frequency
- Rotary roller and chuck both worked flawlessly, even cutting through an aluminum can
- Almost no assembly. Four screws for the base, then the head screws onto the stand

### Cons

- Safety shield exhaust fan cable is very short, so the laser source has to sit next to the head
- The included USB stick only had the original G2 manual
- Pulse patterns show on the material above 8,000mm/s
- Light colored leather and plastics didn't engrave at all
- Infrared wavelength doesn't work on wood or transparent materials like glass and clear acrylic

## Specs

| Spec | Value |
| --- | --- |
| Laser Source | 30W fiber laser |
| Wavelength | 1064nm (infrared) |
| Work Area | 150 x 150mm (electric lift) or 110 x 110mm (manual lift) |
| Max Engraving Speed | 15,000mm/s (galvo). Pulse patterns showed on the material above 8,000mm/s |
| Pulse Frequency | 20 to 200kHz (rated) |
| Focal Length | 261mm (electric lift), 211mm (manual lift) |
| Focusing | Focal pointer and ruler on the stand, measuring ruler, red focus dots |
| Positioning | In-line red laser through the galvo |
| Software | GLaser (included), LightBurn 1.7 or newer |
| Connectivity | USB to computer |

## Where to buy

- [Gweike G2 Pro 30W (Electric Lift, 150x150mm)](https://www.gweikecloud.com/products/g2-pro-fiber-laser-engraver?ref=hoffman&variant=45587415695577)
- [Gweike G2 Pro 30W (Manual Lift, 110x110mm)](https://www.gweikecloud.com/products/g2-pro-fiber-laser-engraver?ref=hoffman)
- [G2 Safety Shield (150mm)](https://www.gweikecloud.com/products/g2-safety-shield?ref=hoffman&variant=44283593490649)
- [G2 Safety Shield (110mm)](https://www.gweikecloud.com/products/g2-safety-shield?ref=hoffman&variant=44283593457881)
- [G2 Roller Rotary](https://www.gweikecloud.com/products/g2-roller-rotary?ref=hoffman&variant=44054266249433)
- [G2 Chuck Rotary](https://www.gweikecloud.com/products/g2-chuck-rotary?ref=hoffman&variant=44054377857241)

Use code hoffman800 for $200 off at Gweike. Prices may have changed since this review.

## Compared with

- [Gweike G2 Max](https://www.hoffman.engineering/blog/gweike-g2-max-review-real-50w-fiber-power-with-a-catch/) ($2,499 at review): Type Fiber; Power 50 W (1,064 nm)
- [ComMarker B6 60W MOPA](https://www.hoffman.engineering/blog/commarker-b6-60w-mopa-review-deep-brass-and-color-steel/) ($3,599 at review): Type MOPA; Power 60 W (1,064 nm)
- [Gweike G2](https://www.hoffman.engineering/blog/the-most-affordable-fiber-laser-deep-metal-engraving-color-stainless-steel-and-more-gweike-g2/) ($1,999 at review): Type Fiber; Power 20 W (1,064 nm)
- [Monport GA60 60W MOPA Fiber Laser](https://www.hoffman.engineering/blog/monport-ga60-mopa-review-one-button-autofocus-deep-brass/) ($4,599 at review): Type MOPA; Power 60 W (1,064 nm)

Full comparison: https://www.hoffman.engineering/compare/lasers/

## FAQ

### Is the Gweike G2 Pro worth it?

The G2 Pro refines the original G2 with 50% more power at about half the weight, plus quality of life features like the focal pointer and LightBurn support. The extra power can cut hours off deep engraving jobs. If you want a fiber laser for almost any metal and dark plastics, it's an excellent choice, and I think the upgrade over the original G2 is worth the extra cost.

### What materials can the Gweike G2 Pro engrave?

As a 1064nm fiber laser it works on almost all metals (gold, silver, stainless steel, brass, anodized aluminum), dark plastics, dark leather and stone like slate. Light colored leather didn't engrave in my tests. It doesn't work on wood or transparent materials like glass and clear acrylic, although a dark surface treatment might let you mark glass.

### How much faster is the G2 Pro than the original Gweike G2?

A deep engraved brass coin, with about a millimeter of material removed, took a little over an hour on the G2 Pro compared to about 2 hours on the 20W original G2.

### Does the Gweike G2 Pro work with LightBurn?

Yes. LightBurn 1.7 supports the G2 and G2 Pro, and setup was easy. Gweike also includes GLaser on a USB stick, and I had no issues with either program. LightBurn adds features like 3D Slice for engraving 3D designs.

### Can the Gweike G2 Pro be used handheld?

Yes, with the optional safety shield. Remove the Main Engine from the stand, attach the shield, and rest it on the surface. The shield sets the correct focal height, so you can engrave objects too large for the stand.

---

This Gweike G2 Pro was provided by Gweike for review. Gweike did not pay for this review. This post contains affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. All opinions are my own.
