# How to Write Anycubic ACE Pro RFID Tags With Your Phone

Make the Anycubic ACE Pro recognize any filament spool. Write your own RFID tags with an Android phone and NTAG213 stickers for about 64 cents per spool.

- Author: Chris Hoffman (Hoffman Engineering)
- Published: 2025-07-23
- Category: Tutorials
- Video: https://www.youtube.com/watch?v=d_LfHO6Lc2k
- Web page: https://www.hoffman.engineering/blog/how-to-write-anycubic-ace-pro-rfid-tags-with-your-phone/

The **Anycubic ACE Pro** only recognizes a spool automatically when the spool carries an RFID tag, and only Anycubic's own filament ships with one. But you can tag any spool yourself for about **64 cents**, using cheap NFC stickers, a free open-source app and an Android phone. This guide walks through reading, writing and applying custom ACE Pro RFID tags, then syncing them into Anycubic Slicer Next.

## How the ACE Pro Reads RFID Filament Tags

The ACE Pro launched alongside Anycubic's Kobra 3 series. It holds four spools, handles multicolor prints and filament backup, and doubles as a filament dryer. To do any of that, it has to know what material and color sits in each slot.

You can type that in by hand. Anycubic's own filament skips that step: each spool stores its material, color and other data on RFID tags. When you load a spool, the reader in the fin between slots 1 and 2 (or between slots 3 and 4) picks up the tag as the spool turns past it, and the printer configures that slot for you.

You can see the difference in the slot menu. A slot holding an official spool can't be edited, because the printer already knows what's in it. Every other slot needed the material and color entered manually.

## What You Need to Write Custom ACE Pro RFID Tags

The tool that makes this work comes from DnG-Craft, whose [ACE-RFID project on GitHub](https://github.com/DnG-Crafts/ACE-RFID) has all the details. Beyond that, you need two things:

- **RFID stickers:** Ultralight C, NTAG213 or NTAG215 tags. I used [NTAG213 stickers](https://www.amazon.com/dp/B0C5MPDYT8?tag=hoffeng-ace-pro-rfid-20), which come in packs of 50 or [100](https://www.amazon.com/dp/B0C5MR2T83?tag=hoffeng-ace-pro-rfid-20).
- **A writer:** an Android phone with NFC, which covers almost any Android phone today. Without one, you can use a [USB-powered RFID reader/writer](https://www.amazon.com/dp/B07KRKPWYC?tag=hoffeng-ace-pro-rfid-20) or an Arduino-controlled writer.

The phone is the easiest route, so that's what the rest of this guide uses.

## Reading an Official Anycubic Tag

Install the **ACE RFID** app from the Google Play Store. It reads and writes the tag format the ACE Pro uses.

Hold the phone over an official Anycubic spool and the app detects the tag. Reading it shows what the printer sees: in my case, PLA in gray. So any tag can be read, which is a good way to check that your phone's NFC works before you start writing.

## Writing Your Own Tag in the ACE RFID App

Writing a tag takes three choices in the app:

1. **Material type**
2. **Spool weight**
3. **Color**, picked from the preset swatches, from the color spectrum, or by entering a hex value

Then hold the phone over a blank sticker and write. Hover over it again and the app reads back the data you wrote.

## Applying Two Tags to Each Spool

The stickers have an adhesive backing, so they peel off the sheet and stick straight onto the spool's side.

You need **one sticker per side**. With a tag on only one side, slots 2 and 3 won't read the spool reliably. Anycubic does the same thing: each official spool has two separate tags, one per side, with different tag IDs.

The full process for one spool:

1. Stick an RFID sticker on each side of the spool.
2. In the app, select the material type, spool size and color.
3. Place the phone over the first tag and press write.
4. Flip the spool and write the same data to the second sticker.

Load the spool into the ACE Pro and feed the filament. As the tag rotates past the reader, the material and color appear in the ACE menu automatically.

## Tagging PETG and Other Materials

The same steps work for other filament types. For one roll, I selected PETG in black. When I loaded it, the ACE Pro picked PETG for that slot.

## Tagging Your Whole Filament Collection

Placing two stickers on each spool takes seconds. Writing them takes seconds too, as long as you remember both sides. The slowest part is choosing colors: you can pick a preset that's close enough or look up the hex code for the exact color.

After tagging a batch, read each tag back in the app to double-check it. Then load the spools. On my [Kobra 3 V2](https://www.hoffman.engineering/blog/anycubic-kobra-3-v2-combo-review-what-changed/), each spool came up with the right material type and color as it loaded.

## Syncing Custom Tags in Anycubic Slicer Next

In **Anycubic Slicer Next**, the workbench shows the newly loaded spools, with the material and color in each slot. When you sync filament from the ACE Pro, the slicer updates those colors and selects the right profile for each spool. That works because the material list in the ACE RFID app matches the slicer's built-in material profiles.

From there, pull in a multicolor model and print it with your own filament, no manual slot setup needed.

## Which Printers Work With Custom Tags

The tags work with any ACE Pro, whichever printer it's paired with: the Anycubic Kobra 3, Kobra 3 V2, Kobra 3 Max and Kobra S1.

## Cost per Spool and Alternate Writers

I paid **$15.99 for 50 NTAG213 tags** at the time of recording. With two tags per spool, that pack covers 25 spools, about **$0.64 per spool**. The tags can be reused in principle, though I can't say how many times one would survive being peeled off and stuck back on.

No Android phone? DnG-Craft's GitHub page has code for Arduino boards and Windows computers. I bought a USB-connected RFID writer for **$37.99**, and the workflow matches the phone's. The phone is still the most accessible way to write these tags.

DnG-Craft has other 3D printing projects too, including the same custom RFID approach for Creality's CFS system.

*This post contains affiliate links. If you buy through them, I may earn a small commission at no extra cost to you.*

## FAQ

### What RFID tags work with the Anycubic ACE Pro?

DnG-Craft's ACE RFID project works with Ultralight C, NTAG213 and NTAG215 tags. I used NTAG213 stickers with an adhesive backing, which stick straight onto the side of a spool.

### How many RFID tags does each filament spool need?

Two, one on each side of the spool. The ACE Pro's readers sit in the fins between slots 1 and 2 and between slots 3 and 4, so with only one tag, slots 2 and 3 won't read the spool reliably. Official Anycubic spools also carry two tags with different tag IDs.

### Can I write ACE Pro RFID tags without an Android phone?

Yes. DnG-Craft's GitHub project also has code for Windows computers with a USB RFID writer and for Arduino-controlled writers. I tested a USB writer that cost $37.99, and the workflow is the same as on the phone. An NFC-capable Android phone is still the easiest option.

### Do custom RFID tags work on the Kobra S1 and Kobra 3 Max?

Yes. The tags work with any ACE Pro, so they work on the Kobra 3, Kobra 3 V2, Kobra 3 Max and Kobra S1.

### Do custom tags sync with Anycubic Slicer Next?

Yes. Spools you tag show up in the slicer's workbench with their material and color, and syncing the filament from the ACE Pro picks the matching built-in profile for each slot. The material types in the app match the slicer's built-in material profiles.
