# Monport GA60 MOPA Review: One-Button Autofocus, Deep Brass

Monport GA60 MOPA review: a 60W fiber laser with one-button autofocus, deep brass engraving and color on stainless. See my settings, results and the catches.

- Author: Chris Hoffman (Hoffman Engineering)
- Published: 2025-04-28
- Category: Lasers
- Video: https://www.youtube.com/watch?v=Yqnhk_zyAUk
- Web page: https://www.hoffman.engineering/blog/monport-ga60-mopa-review-one-button-autofocus-deep-brass/

## Summary

- Product: Monport GA60 60W MOPA Fiber Laser
- Price: $4,599 at time of review
- Verdict: A capable 60W MOPA fiber laser with a large 175mm work area, autofocus and a Mark button, best for a small business. Monport no longer sells the GA60; the GA 100W is the current GA model.

The **Monport GA60** is a 60W MOPA fiber laser that deep engraved brass coins 1.5mm deep in a little over an hour and turned stainless steel blue, green, purple and gold, all from one machine with one-button autofocus. I spent a month testing it on metals, plastics, leather and stone. This Monport GA60 MOPA review covers the hardware, the software setup (including a LightBurn catch in the manual), the exact settings that worked, and where it struggled.

## Monport GA60 Specs: A 60W MOPA Fiber Laser

The GA60 runs a **60W MOPA fiber laser** at a **1064nm** infrared wavelength. That wavelength handles almost all metals, including gold, silver, titanium, steel and aluminum, plus most plastics. It also works on stone, ceramics and leather. What it won't do is wood or clear materials like glass and clear acrylic.

It's an all-in-one unit. The laser source sits in the base and sends the beam through a fiber optic cable to the head at the top. Inside the head, two galvo mirrors steer the beam at up to **10,000mm/s**, then it passes through the lens onto your material.

## Pulse Frequency and MOPA Control

Every fiber laser is pulsed, firing thousands or millions of times per second. The GA60 covers a pulse frequency range of **1 to 3,000kHz**, and different materials respond to different frequencies, so that wide range gives you room to dial things in.

MOPA (Master Oscillator Power Amplifier) adds another layer. You can adjust the waveform of each pulse down to the nanosecond, the q-pulse setting you'll see in the settings below. That lets the laser hit peak power at almost any frequency, where a non-MOPA fiber laser loses power as the frequency climbs. In practice, it's one more knob for tuning a material, and it's the one that unlocks colors on stainless steel.

## One-Button Autofocus and the Mark Button

This was my favorite part of the GA60. Slide your material under the focus area, press the autofocus button, and the machine measures the distance to the surface and moves the head to the right height. It was calibrated perfectly. I never had to think about focus.

You can still move the head with the up and down buttons on the front or the knob on top, and there's a dual red dot guide: a red dot on the head plus the inline red laser through the lens. Bring the two dots together and you're in focus. I never needed it.

The front panel also has a laser power switch that doubles as an emergency cutoff, so you don't have to reach around to the main power switch on the back. Next to it is the **Mark button**. Use the inline red laser to position your material, press Mark, and the job starts without walking back to your computer. Around back you'll find the main power input, power switch, and a USB Type-B port for the computer.

## Size and Work Area

The GA60 is a big machine at 42cm wide, 60cm deep and 66cm tall (16 x 24 x 26 inches). That size supports a **175 x 175mm** (6.9 x 6.9 inch) work area, and I never felt short on space.

When you do need more room, the laser head rotates 90 degrees to the side, so you can position it over almost any object. The work surface has a grid of bolt holes for the included material jig, which lifts parts off the surface and gives you repeatable positioning for batch jobs.

## Uncrating and Setup

The hardest part of setup is getting the GA60 out of its crate. It's a full wooden crate weighing close to 100 pounds, so get a second person to help move it. A hammer and crowbar lift the staples off the lid.

The laser head unfolds and locks with two small thumb screws. I found it easier to unfold the head while the machine was still in the crate, and then I could lift it out by myself. After that, there's no other assembly. I was running in a matter of minutes. I covered the uncrating, LightBurn setup and calibration in more detail in a separate guide: [how to set up and calibrate a MOPA fiber laser in LightBurn](https://www.hoffman.engineering/blog/how-to-set-up-calibrate-mopa-fiber-laser-lightburn/).

## Software: BSLAppSimple and LightBurn

Monport includes **BSLAppSimple**, the successor to EZCad, on a USB drive, and you can launch it straight from the drive. Every machine is calibrated at the factory, and the machine-specific config is on that same drive and engraved on a panel on the side of the laser. Launching the included software loads the right config. The drive's autosave folder even has the files used to engrave that calibration panel and the autofocus label, so the laser helped make itself.

Most of my testing was in **LightBurn**. You need a LightBurn Pro license for fiber lasers, and it's worth it. LightBurn imports the EZCad config file, and BSLAppSimple's drivers don't conflict with LightBurn the way the old EzCad2 did, so you can switch between programs without reinstalling drivers.

One catch: step 14 of the manual says Galvo 1 on the nameplate maps to Galvo 1 in LightBurn. LightBurn's import had them swapped, and LightBurn was right. The manual is wrong, so trust the import.

## Engraving Coated Aluminum

Before the material tests, a reminder: know what's safe to put in a laser. Some materials can permanently damage the machine or you. Never cut unknown materials, and always use proper eye protection and fume extraction.

The GA60 strips the coating off aluminum fast. My best results came at **6,000mm/s, 50% power, 50kHz and a 200ns q-pulse**. It would be a great machine for churning out aluminum business cards.

You can engrave the aluminum itself, but it gets loud when you do. With 60 watts on tap, it's also easy to set the power a little too high and cut into the aluminum when you only meant to remove the coating.

## Deep Engraving Brass with the GA60

Deep engraving brass is where the GA60 stretches its legs. I ran the main engraving at **90% power** with a lower-power cleanup pass every 5 layers, and these brass coins came out beautiful.

It went **1.5mm deep in a little over an hour**. LightBurn makes coins like this easy: start from a grayscale depth map and use its 3D Slice feature to handle the layers.

## Cutting Stainless Steel Shim Stock

I picked up stainless steel shim stock in several thicknesses to see how the GA60 cuts:

- **0.05mm** cut through in one or two passes.
- **0.1mm** took five or six passes, and heat started to warp the steel.
- **0.2mm** warped too much to manage. Some edges cut all the way through, but the warping, plus my wood backing catching fire, made me stop before the designs fully cut out.

The 60 watts cut thin sheet without trouble. Cutting without warping will take more experience and different techniques.

## Color Marking Stainless Steel with MOPA

This is the GA60's other trick on stainless. By varying power, frequency, line interval and q-pulse, you can produce colored oxides: blues, greens, purples, orange, magenta and gold. They look even more vibrant in person than on camera. This is where the MOPA pulse control pays off.

## Dark Acrylic, Dark PLA and Leather

The GA60 does well on darker plastics. On black acrylic, the MOPA settings let me find crisp, high-contrast white marks, and the 3D Print Log keychains turned out great.

A navy blue matte PLA 3D print took crisp white designs too, which makes this handy for marking printed panels, enclosures and parts. Color matters: light-colored or clear plastics won't work.

Dark leather took on a nice gold look. It was easy to use too much power and burn through, though, and like the plastics, lighter leather didn't work as well.

## Engraving Slate

Stone and ceramics work well. On a slate coaster, higher power and a few passes engraved deep enough to give a 3D effect, without using LightBurn's 3D Slice mode like I did on the brass.

## Pricing and the GA Lineup

At recording, the GA60 was on sale for **$4,599**, with the GA 30W at $3,499 and the GA 100W at $6,499. Monport was also offering a free K40 40W CO2 laser at checkout. That price put the GA60 in the middle of the market, and its work area is larger than many other 60W MOPA fiber lasers, which commanded a slightly higher price.

That has changed. Monport no longer sells the GA60 or the GA 30W: both product pages now redirect to the **GA 100W**, which is currently **$4,979**. If you're cutting or deep engraving metal, more power helps. For plastics and stainless colors, a lower-power MOPA is enough.

## Verdict: Should You Buy the Monport GA60?

The GA60 impressed me. It's physically large, it has a large 175 x 175mm work area, and the autofocus plus Mark button workflow makes everyday jobs easy: drop the material in, press focus, position with the red dot, press Mark. The results back it up, from 1.5mm deep brass coins to bright colors on stainless.

Beyond the manual's swapped galvo settings, I ran into no issues over a month of testing. It handled every test reliably. The real hurdles are getting it out of a 100-pound crate and finding space for it, plus my own learning curve on cutting stainless without warping.

It's a strong fit for a small business that wants a capable fiber laser with a bigger work area, full MOPA control, and conveniences like autofocus and a start button. Skip it if you need something portable. The catch now is availability: Monport has discontinued the GA60, so the GA 100W is the current machine in this lineup. [Check the GA 100W at Monport](https://monportlaser.com/products/monport-100e2m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup), and if you're comparing fiber lasers, see my [Gweike G2 Max review](https://www.hoffman.engineering/blog/gweike-g2-max-review-real-50w-fiber-power-with-a-catch/), a 50W non-MOPA fiber laser.

## Pros and cons

### Pros

- One-button autofocus was calibrated perfectly. I never had to adjust focus by hand
- Mark button on the front starts a job after you position the material with the red-dot preview
- Large 175 x 175mm work area, and the laser head rotates 90 degrees to reach bigger objects
- MOPA pulse control produces blues, greens, purples, oranges, magentas and golds on stainless steel
- Deep engraved brass coins 1.5mm deep in a little over an hour
- No assembly. Up and running in minutes once it's out of the crate
- Factory calibration files on the included USB drive, and BSLAppSimple drivers don't conflict with LightBurn
- Ran every test without an issue over a month of use

### Cons

- Ships in a wooden crate close to 100 pounds. Plan on a second person and a crowbar
- The manual's LightBurn setup step has Galvo 1 and Galvo 2 swapped. LightBurn's config import is correct
- Thin stainless steel warps from the heat when cutting 0.1mm and thicker
- Easy to overshoot on power: aluminum engraves past the coating, leather burns through
- LightBurn needs a Pro license for fiber lasers
- Large, heavy machine. Not portable
- Doesn't work on wood, clear acrylic, glass, or light-colored plastics and leather

## Specs

| Spec | Value |
| --- | --- |
| Laser Power | 60W MOPA fiber |
| Wavelength | 1064nm (infrared) |
| Working Area | 175 x 175mm (6.9 x 6.9in) |
| Max Galvo Speed | 10,000mm/s |
| Pulse Frequency | 1 to 3,000kHz, adjustable pulse width (q-pulse) in nanoseconds |
| Focus | One-button autofocus, dual red dot guide, motorized up/down buttons |
| Software | BSLAppSimple (included), LightBurn Pro |
| Connectivity | USB Type-B |
| Machine Dimensions | 42 x 60 x 66cm (16 x 24 x 26in) |

## Where to buy

- [Monport GA 100W MOPA Fiber Laser (current GA model)](https://monportlaser.com/products/monport-100e2m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup)
- [GA 30W MOPA Fiber Laser](https://monportlaser.com/products/monport-30m7-integrated-175af-mopa-fiber-laser-engraver-marking-machine-1?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup)
- [Monport 150W 3-Layer Fume Extractor](https://monportlaser.com/collections/fume-extractor/products/monport-150w-laser-fume-extractor-with-3-layer-filter-for-co2-fiber-laser-engraver?sca_ref=8239330.EDMEM0OuzY&sca_source=Setup)

Prices may have changed since this review.

## FAQ

### Is the Monport GA60 still available?

No. Monport's GA60 product page now redirects to the GA 100W, which was $4,979 when this post was checked. At the time of the review the GA60 was on sale for $4,599, the GA 30W for $3,499 and the GA 100W for $6,499.

### What materials can the Monport GA60 engrave?

As a 1064nm fiber laser, it works on almost all metals (gold, silver, titanium, steel, aluminum, brass) and on many plastics, plus stone, ceramics and leather. It doesn't work on wood or clear materials like glass or clear acrylic. Dark plastics and dark leather mark well; light-colored ones don't.

### Does the Monport GA60 work with LightBurn?

Yes. You need a LightBurn Pro license for fiber lasers, and LightBurn can import the EZCad configuration file from the included USB drive. That import is correct; the manual's step 14 has Galvo 1 and Galvo 2 swapped. The included BSLAppSimple drivers don't conflict with LightBurn, so you can switch between the two programs.

### Can the Monport GA60 cut stainless steel?

It cut 0.05mm stainless shim stock in one or two passes and 0.1mm in five or six, but heat made the 0.1mm sheet start to warp. At 0.2mm the warping was unmanageable, and I stopped before the designs fully cut out.

### What does MOPA mean on a fiber laser?

MOPA stands for Master Oscillator Power Amplifier. It lets you adjust the waveform of each pulse down to the nanosecond, so the laser reaches peak power at almost any frequency, unlike non-MOPA fiber lasers that lose power at higher frequencies. That extra setting is what makes the range of colors on stainless steel possible.

---

This Monport GA60 was provided by Monport for review. This post contains affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. All opinions are my own.
