# Snapmaker U1 Full Spectrum: Dozens of Colors From 4 Spools

Snapmaker U1 Full Spectrum review: four spools blended into dozens of colors, 41-hour print times, and the ratio mistake that caused banding. See the results.

- Author: Chris Hoffman (Hoffman Engineering)
- Published: 2026-11-04
- Category: 3D Printers
- Video: https://www.youtube.com/watch?v=gzdvZYFFY-0
- Web page: https://www.hoffman.engineering/blog/snapmaker-u1-full-spectrum-dozens-of-colors-from-4-spools/

## Summary

- Product: Snapmaker U1
- Price: $699 at time of review
- Verdict: A fast, low-waste four-toolhead printer, and Full Spectrum turns its four spools into dozens of colors. Buy it for multi-color printing without the purge waste. If you mostly print single-color functional parts, you'd be paying for toolheads you rarely use.

This chameleon is 265 millimeters tall, and every color on it came out of four spools of filament: cyan, magenta, yellow, and gray. The printer behind it is the **Snapmaker U1**, and the feature is **Full Spectrum**, a color mixing mode Snapmaker added after launch. This Snapmaker U1 Full Spectrum review covers what's changed since my [first look at the U1](https://www.hoffman.engineering/blog/snapmaker-u1-review-the-new-king-of-3d-printing/), how the blending works, the results, and the mistake that put stripes of magenta through the chameleon's yellow.

## Snapmaker U1 Recap: What's Changed Since Launch

The U1 is a filament-based Core-XY printer with a **270 x 270 x 270mm** build volume and a rated top speed of **500mm/s**. What sets it apart is the SnapSwap system. There are four separate toolheads, each with its own extruder and hotend, and each fed from its own spool. To change colors, the U1 parks one toolhead and picks up the next. Snapmaker rates a swap at about five seconds.

The hardware has barely changed. My original Kickstarter unit sits right next to this newer one, and apart from the upgrades I've added to mine, they're pretty much identical.

The firmware is a different story. It's up to version 2.0.0, which landed in September. Along the way Snapmaker added AI spaghetti detection, skipping individual objects from the touchscreen, Ethernet support, nozzle sizes from 0.2 to 0.8mm, and support for the optional Top Cover.

## Setup and Nozzle Alignment

Setup hasn't changed either. Pull out the foam, unscrew the print bed, slide on the filament feeder and the side spool holders, and snap the four toolheads on magnetically. Run the tubes and cables, and the touchscreen walks you through the rest.

Nozzle alignment comes first. Each toolhead touches a metal cup under the print bed so the printer can measure the offsets between all four nozzles. That matters more than it sounds. If one nozzle is even slightly off, color boundaries won't line up, and Snapmaker notes that with Full Spectrum, misalignment shows up as shifted colors.

After that the U1 runs auto bed leveling and a vibration sweep to calibrate input shaping. Across a month of testing, I never had to redo any of it.

## Tool Changes, Waste, and Reliability

Most multi-color printers have a single nozzle. To change colors they cut the filament, pull it back, load the new one, and push plastic through until the old color runs clean. That purged plastic is where the time and the waste go.

The U1 skips all of that, because every color already sits in its own hot nozzle. The only purge I see now is a small amount when the printer runs its dynamic flow calibration after you load a new spool. During a print, the only waste is the prime tower, a small column printed beside the model so each nozzle is flowing properly before it touches the part.

I measured the difference in my first look. A two-color Benchy on the Anycubic Kobra S1 took 9 hours and 23 minutes and threw out 183 grams of purge, for a boat that weighs 10.9 grams. The U1 printed the same Benchy in **1 hour and 40 minutes**, with about 10 grams of prime tower as the only waste.

Last time I wondered how the toolheads would hold up. After hundreds of hours of printing and thousands of tool changes, I've had no issues.

## How Snapmaker U1 Full Spectrum Works

Four toolheads normally means four colors. Full Spectrum prints very thin layers and switches colors from layer to layer. Put a thin layer of yellow on a thin layer of cyan, and from arm's length your eye blends them into green. The filament never mixes inside a nozzle. Each layer is still one solid color. It's the same idea as the halftone dots in a magazine.

This is where four separate hotends pay off. A Full Spectrum print can change colors on almost every layer. On a single-nozzle printer, each of those is a purge. On the U1, it's a swap.

The filament matters too. Snapmaker sells a [Full Spectrum PLA bundle](https://us.snapmaker.com/products/pla-full-spectrum-filament-bundle-4kg) with four one-kilogram spools in cyan, magenta, yellow, and gray, and I used it for every Full Spectrum print here. It's semi-translucent, which softens the line between layers so the blend reads as one color instead of stripes. You can blend other materials and colors, but the more opaque the filament, the more you'll see the individual layers.

Slicing happens in Snapmaker Orca, and the color tools are excellent. Pick your four filaments and it shows you a palette of the mixed colors they can make. You can set the ratios between two or three filaments yourself. Import a model that already has colors, and it'll try to match each one with a blend automatically.

## Full Spectrum Results: Palette and Chameleons

I started with a **26-shade palette**. It's the quickest way to see which blends your filament can produce before you commit to a long print. At 0.1mm layers, it took 1 hour and 43 minutes and used about 14 grams of filament.

Then I went big. The chameleon is **265mm tall**, printed at 0.1mm layers with Snapmaker's color mixing profile. It took **41 hours and 26 minutes** and used about 286 grams of filament.

For the last test I filled a plate with five chameleons, each 80mm tall, with a different set of colors and patterns on each one. That file has 17 blended colors defined, all from the same four spools. It took 41 hours and 38 minutes and used about 240 grams of filament.

That's the cost of Full Spectrum: time. Thin layers and constant tool changes turn hours into days. For prints like these, it's worth it.

## The Ratio Mistake That Caused Banding

The big chameleon taught me the most important lesson of Full Spectrum. Look at its yellow section. Those aren't smooth blends. They're visible bands of magenta.

When one color is only a small share of a blend, it lands on a few layers, spread far apart. Those layers show up as stripes instead of a tint. Raising the magenta a little in that shade would have evened it out.

Snapmaker's color matching tool uses a 15 percent minimum by default. After this print, I keep every color in a blend above about **20 percent**. How visible the bands are still depends on your filament and the model, so print the palette first.

## Single-Color Print Quality

Full Spectrum gets the attention, but most of what I print is one color, and the U1 still does that well.

A cable box in black PLA at 0.16mm layers came out with consistent walls and perfect bottom surfaces off the textured PEI spring steel bed. I can't find any ringing or other artifacts. That's the input shaping in the Klipper firmware doing its job.

A Captain America bust, 249mm tall in red PLA at 0.2mm layers, finished in five hours.

And you aren't locked into Snapmaker filament. One Chillet print mixed Snapmaker white, Anycubic turquoise, and Sunlu blue in a single job.

## Klipper Root Access and 3D Print Log

Klipper is also where the U1 opens up for tinkerers. By default, Snapmaker locks the Klipper configuration so you can't break anything by accident. But root access is one warning prompt away in the touchscreen menu. Accept it, and you can do pretty much anything you want, including installing community-developed firmware. Anything you change from there is on you.

One plug for my own project. [3D Print Log](https://www.3dprintlog.com), my print tracking web app, works with the U1 and Snapmaker Orca, and every print time and setting in this post came out of it. You can upload filament usage and print settings directly from Snapmaker Orca, or use the [3D Print Log Bridge](https://github.com/HoffmanEngineering/printlog-bridge) to capture every print from Klipper automatically.

## Snapmaker U1 Price, Filament Bundle, and Top Cover

When I recorded the review, the [Snapmaker U1](http://snapmaker.sjv.io/3JDx9n) was on sale for $749 on Snapmaker's store, down from a list price of $999. As of this writing it's listed at **$699**. The Full Spectrum PLA bundle is $69.99 for four kilograms.

The [Top Cover](https://snapmaker.sjv.io/9L5PJj) is on pre-order for $149, down from $249. It adds an enclosure and filtration, and Snapmaker designed it for printing ABS, ASA, nylon, and polycarbonate. I haven't tested it, so I can't tell you how well it works.

If you print PLA and PETG, you can skip the cover for now. If you want to try Full Spectrum, start with the bundle, because its translucency is what makes the blends work.

## Verdict: Should You Buy the Snapmaker U1?

The Snapmaker U1 is a fast, low-waste multi-color printer, and it's my favorite printer to use. The toolchanger makes color changes quick and almost waste-free, and Klipper leaves room to tinker when you want to.

Full Spectrum makes an already great machine better. Four spools now give you dozens of colors. But it's a feature for decorative prints, not everyday ones. If you mostly print single-color functional parts, you'd be paying for toolheads you rarely use.

My complaints are small. Full Spectrum is slow, with the big prints here taking over 41 hours each, and getting the ratios right takes a test print or two. The Top Cover is a separate purchase, and you'll need it for ABS and other high-temperature filaments. Across this whole test, nothing on this unit needed a fix or a recalibration, and my Kickstarter unit is still running. I give the Snapmaker U1 my highest recommendation for anyone who wants multi-color printing without the purge waste.

[Check the latest price on the Snapmaker U1](http://snapmaker.sjv.io/3JDx9n)

## Pros and cons

### Pros

- Full Spectrum blends four spools into dozens of colors. One file used 17 blended colors
- Color changes are tool swaps, with no purging. The only waste during a print is the prime tower
- Hundreds of hours and thousands of tool changes with no issues
- Snapmaker Orca previews the blends your filaments can make and matches imported model colors automatically
- Single-color prints came out with consistent walls and no ringing I could find
- Klipper root access is one warning prompt away, including community-developed firmware
- Nothing needed a fix or a recalibration across the whole test

### Cons

- Full Spectrum is slow. The big prints took over 41 hours each
- Getting the blend ratios right takes a test print or two
- A color at a small share of a blend can show up as visible stripes
- The enclosed Top Cover is a separate purchase, and you need it for ABS and other high-temperature filaments
- Opaque filaments show the individual layers more, so blends work best with the semi-translucent bundle

## Specs

| Spec | Value |
| --- | --- |
| Build Volume | 270 x 270 x 270mm |
| Motion System | Core-XY |
| Max Speed | 500mm/s rated |
| Toolheads | 4, each with its own extruder, hotend and spool |
| Tool Change Time | About 5 seconds (Snapmaker's rating) |
| Nozzle Sizes | 0.2 to 0.8mm supported |
| Bed | Textured PEI spring steel |
| Enclosure | Top Cover with filtration sold separately |
| Firmware | Klipper, version 2.0.0 at time of review. Root access available |
| Slicer | Snapmaker Orca with Full Spectrum color mixing tools |
| Connectivity | Ethernet support added in firmware |

## Where to buy

- [Snapmaker U1](http://snapmaker.sjv.io/3JDx9n): $699
- [PLA Full Spectrum Filament Bundle (Gray Edition, 4kg)](https://us.snapmaker.com/products/pla-full-spectrum-filament-bundle-4kg): $69.99
- [Top Cover for Snapmaker U1 (pre-order)](https://snapmaker.sjv.io/9L5PJj): $149

Prices may have changed since this review.

## FAQ

### Is the Snapmaker U1 worth it?

I give the Snapmaker U1 my highest recommendation for anyone who wants multi-color printing without the purge waste. It's fast, the toolchanger makes color changes almost waste-free, and nothing on this unit needed a fix or a recalibration during testing. If you mostly print single-color functional parts, you'd be paying for toolheads you rarely use.

### How does Snapmaker Full Spectrum work?

Full Spectrum prints very thin layers and switches colors from layer to layer. A thin layer of yellow on a thin layer of cyan reads as green from arm's length. The filament never mixes inside a nozzle. Each layer is still one solid color and the blending happens in your eye, the same idea as halftone dots in a magazine.

### How long do Full Spectrum prints take?

Longer than regular prints. At 0.1mm layers, a 26-shade test palette took 1 hour and 43 minutes. A 265mm chameleon took 41 hours and 26 minutes, and a plate of five 80mm chameleons took 41 hours and 38 minutes. Thin layers and constant tool changes are where the time goes.

### How do you avoid color banding with Full Spectrum?

Keep every color in a blend above about 20 percent. When one color is only a small share, it lands on a few layers spread far apart, and those layers show up as stripes instead of a tint. Snapmaker's color matching tool uses a 15 percent minimum by default. How visible the bands are still depends on your filament and the model.

### Do you need Snapmaker's Full Spectrum filament?

No, you can blend other materials and colors. But the more opaque the filament is, the more you'll see the individual layers. Snapmaker's Full Spectrum PLA bundle is semi-translucent, which softens the line between layers so a blend reads as one color. If you want to try Full Spectrum, start with the bundle.

---

This Snapmaker U1 was provided by Snapmaker for review. It's my second U1. I backed the original Kickstarter with my own money. This post contains affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. All opinions are my own.
