# Hoffman Engineering: 3D printer and laser engraver reviews

Hands-on 3D printer, resin printer, laser engraver and 3D scanner reviews by Chris Hoffman, with real test prints, specs and discount codes.

Hoffman Engineering is Chris Hoffman's review site and YouTube channel. I test laser engravers, CNC machines and 3D printers and share honest, hands-on reviews.

## Sections

- [Reviews](https://www.hoffman.engineering/blog/): every review and post, newest first
- [Compare lasers](https://www.hoffman.engineering/compare/lasers/): rated specs and tested results for every laser engraver reviewed
- [Projects](https://www.hoffman.engineering/projects/): builds and experiments
- [Tutorials](https://www.hoffman.engineering/tutorials/): how-tos for 3D printing, scanning and lasers
- [About](https://www.hoffman.engineering/about/): about Chris Hoffman and the channel
- [Work with me](https://www.hoffman.engineering/work-with-me/): review units and collaborations for brands
- [RSS feed](https://www.hoffman.engineering/rss.xml): the 20 newest posts

## Latest posts

Each link is the Markdown version of the post.

- [WeCreat Lumos Flex Review: Fiber and Diode Laser in One](https://www.hoffman.engineering/blog/wecreat-lumos-flex-review-fiber-and-diode-laser-in-one.md) (2026-11-13): WeCreat Lumos Flex review: a 15W fiber and 15W diode laser in one enclosed machine. See a month of test results, the LightBurn problems, and who it suits.
- [Snapmaker U1 Full Spectrum: Dozens of Colors From 4 Spools](https://www.hoffman.engineering/blog/snapmaker-u1-full-spectrum-dozens-of-colors-from-4-spools.md) (2026-11-04): Snapmaker U1 Full Spectrum review: four spools blended into dozens of colors, 41-hour print times, and the ratio mistake that caused banding. See the results.
- [ACMER S2 Pro 36W Review: Big Power, Bare-Bones Price](https://www.hoffman.engineering/blog/acmer-s2-pro-36w-review-big-power-bare-bones-price.md) (2026-10-26): ACMER S2 Pro 36W review: single-pass 3mm birch cuts at 900mm/min for $549, plus a real test of the 24,000mm/min speed rating. See what the price leaves out.
- [FilaPartner E1 Filament Dryer Review: Buy It for the Boxes](https://www.hoffman.engineering/blog/filapartner-e1-filament-dryer-review-buy-it-for-the-boxes.md) (2026-10-14): Chitu FilaPartner E1 review: a four-spool filament dryer with two removable dry boxes. See my thermal and drying test results before you decide to buy it.
- [Anycubic P1 Max Hands-On Review: Is 18.3L Worth It?](https://www.hoffman.engineering/uncategorised/anycubic-p1-max-hands-on-review-is-18-3l-worth-it.md) (2026-09-28): What happens when your resin printer makes parts so big that your wash and cure station can't fit them? That's the first problem I ran into with the…
- [FLUX Beambox II Review: The Polished 55W CO2 Laser](https://www.hoffman.engineering/blog/flux-beambox-ii-review-polished-55w-co2-laser.md) (2026-09-21): FLUX Beambox II review after 50 jobs on five materials. See the one-hour setup, cut settings, a LightBurn limit and whether this 55W CO2 laser is worth it.
- [Sculpfun E1 Dual Review: 12W Diode and IR Laser in One](https://www.hoffman.engineering/blog/sculpfun-e1-dual-review-12w-diode-and-ir-laser-in-one.md) (2026-09-14): Sculpfun E1 Dual review: a fine-spot 12W blue diode plus a 3W IR module that engraves bare metal. See my test results and whether the IR laser is worth it.
- [AlgoLaser Alpha MK2 40W Review: Is 40 Watts Too Much?](https://www.hoffman.engineering/blog/algolaser-alpha-mk2-40w-review-is-40-watts-too-much.md) (2026-08-31): AlgoLaser Alpha MK2 40W review: 1,050mm/min plywood cuts and vivid stainless steel colors, but softer photo engraving. See if 40 watts is right for you.
- [InfiMech EX Review: A $259 CoreXY That Needs Tuning](https://www.hoffman.engineering/blog/infimech-ex-review-259-corexy-that-needs-tuning.md) (2026-08-24): InfiMech EX review: a $259 Klipper CoreXY 3D printer with open config files. See the three OrcaSlicer settings that fixed its VFAs and saved 45 minutes.
- [Mecpow M1 Review: A Tiny Class 1 Enclosed Laser for $179](https://www.hoffman.engineering/blog/mecpow-m1-review-tiny-class-1-enclosed-laser-for-179.md) (2026-07-29): Mecpow M1 review: a month with the $179 FDA Class 1 enclosed 5W laser engraver and the P50 fume extractor. See the cut tests and who should buy this one.
- [Wizmaker Artisan 01 Review: Can a $599 CNC Cut Aluminum?](https://www.hoffman.engineering/blog/wizmaker-artisan-01-review-can-a-599-cnc-cut-aluminum.md) (2026-05-19): Wizmaker Artisan 01 review: a month of poplar, oak and 6061 aluminum on the $599 desktop CNC. See where the 300W spindle works and when to buy the 500W.
- [Genmitsu Kintix 10W Review: The Hidden 85° Galvo Setting](https://www.hoffman.engineering/blog/genmitsu-kintix-10w-review-the-hidden-85-galvo-setting.md) (2026-05-05): Genmitsu Kintix 10W review: a Class 1 enclosed hybrid galvo laser engraver, and the 85 degree scan angle setting that unlocks its speed. See the test results.
- [ComMarker Omni X UV Laser Review: 3D Engraving Inside Glass](https://www.hoffman.engineering/blog/commarker-omni-x-uv-laser-review-3d-engraving-inside-glass.md) (2026-04-27): ComMarker Omni X review: a month with the enclosed 6W UV laser, from 3D engraving inside glass to metal, wood and leather. See the results and current price.
- [Creality Falcon A1: Best Enclosed Laser Under $600](https://www.hoffman.engineering/laser/creality-falcon-a1-best-enclosed-laser-under-600.md) (2026-04-07): The Creality Falcon A1 is a fully enclosed, Class 1 certified 10W diode laser engraver with a built-in camera, included air assist, and a CoreXY motion…
- [Is the HeyGears Reflex the Ultimate Resin Printer?](https://www.hoffman.engineering/blog/is-the-heygears-reflex-the-ultimate-resin-printer.md) (2026-03-26): Resin printing has a reputation for being finicky. Exposure tweaking, bed releveling, babysitting resin levels, dealing with failed prints. The HeyGears…
- [VEVOR Hybrid Heat Press: Best All-in-One Press?](https://www.hoffman.engineering/blog/vevor-hybrid-heat-press-best-all-in-one-press.md) (2026-03-13): If you want to press shirts, hats, mugs, and plates without buying four separate machines, the VEVOR Hybrid Heat Press is built for you. This 8-in-1…
- [ACMER K1 Review: Portable Laser Worth Buying?](https://www.hoffman.engineering/blog/acmer-k1-review-portable-laser-worth-buying.md) (2026-02-17): The ACMER K1 is a fully enclosed, Class 1 laser engraver that weighs just over five pounds and costs under $300. That combination is nearly unheard of in…
- [AtomStack Swift Review: Real Results Under $200](https://www.hoffman.engineering/blog/atomstack-swift-review-real-results-under-200.md) (2026-01-19): The AtomStack Swift is one of the most affordable benchtop laser engravers on the market, with the 12W version coming in at $169 and the 7W starting at…
- [GratKit S1 3D Scanner Review: Best Mid-Range Pick?](https://www.hoffman.engineering/blog/gratkit-s1-3d-scanner-review-best-mid-range-pick.md) (2026-01-16): The GratKit S1 is a dual-mode structured light 3D scanner that promises automated turntable scanning, handheld flexibility, full-color texture capture…
- [Is the Obziy DP1 the Best Budget DTF Printer?](https://www.hoffman.engineering/blog/is-the-obziy-dp1-the-best-budget-dtf-printer.md) (2026-01-12): If you've been searching for an affordable way to bring DTF printing in-house, the Obziy DP1 DTF Printer deserves a serious look. After a full month of…
- [Platecycler C1M Review: Best upgrade for the Bambu A1 Mini](https://www.hoffman.engineering/blog/platecycler-c1m-review-best-upgrade-for-the-bambu-a1-mini.md) (2025-12-10): The Chitu Systems Platecycler C1M is a $79 add-on for the Bambu Labs A1 Mini that automatically swaps build plates, clears finished prints, and queues up…
- [Snapmaker U1 Review: The New King of 3D Printing](https://www.hoffman.engineering/blog/snapmaker-u1-review-the-new-king-of-3d-printing.md) (2025-12-01): The Snapmaker U1 is a core-XY 3D printer with four separate toolheads, and it might be the most exciting machine to hit the desktop market in years. This…
- [Genmitsu Kortek Laser: Surprising Budget Performer](https://www.hoffman.engineering/uncategorised/genmitsu-kortek-laser-surprising-budget-performer.md) (2025-11-25): The Genmitsu Kortek is one of the most compact and affordable diode laser engravers on the market, and after a full month of hands-on testing, it…
- [VEVOR Pin Tumbler Review: Real Results on Brass](https://www.hoffman.engineering/blog/vevor-pin-tumbler-review-real-results-on-brass.md) (2025-11-18): Hand polishing jewelry and metal parts takes forever, and the results are inconsistent. The VEVOR KT-185 Magnetic Pin Tumbler promises to handle all of…
- [Axiscreat i3030 CNC Review: Worth It Under $500?](https://www.hoffman.engineering/uncategorised/axiscreat-i3030-cnc-review-worth-it-under-500.md) (2025-11-05): The Axiscreat i3030 CNC router sits at a price point where you start to wonder if the specs are too good to be true. After a full month of testing it on…
- [3DMakerPro Toucan: Best Portable 3D Scanner?](https://www.hoffman.engineering/uncategorised/3dmakerpro-toucan-best-portable-3d-scanner.md) (2025-10-23): The 3DMakerPro Toucan promises something most 3D scanners at this price point can't: a fully self-contained scanning experience with no laptop, no phone…
- [Anycubic Photon Mono M7 Pro Review – 14K Resin Printing at a Budget Price](https://www.hoffman.engineering/blog/anycubic-photon-mono-m7-pro-review-14k-resin-printing-at-a-budget-price.md) (2025-10-03): Hands-on review of the Anycubic Photon Mono M7 Pro — a 14K resin printer with auto-fill, heated vat, and pro features at an impressively low price.
- [Flashforge AD5X Review – Fast, Affordable Multi-Color 3D Printing](https://www.hoffman.engineering/blog/flashforge-ad5x-review-fast-affordable-multi-color-3d-printing.md) (2025-09-23): Flashforge AD5X review: a fast CoreXY 3D printer with a built-in 4-color Intelligent Filament System, easy setup and great print quality, tested.
- [VEVOR A7 5W Review: Cheap Laser, Surprising Cuts](https://www.hoffman.engineering/blog/vevor-a7-5w-review-cheap-laser-surprising-cuts.md) (2025-09-12): VEVOR A7 5W review: a budget diode laser that cut 3mm plywood at 250mm/min. See my wood, acrylic, slate, leather and metal tests, plus the LightBurn power fix.
- [How Deep Can a Fiber Laser Engrave Slate? 2.8mm Tested](https://www.hoffman.engineering/blog/how-deep-can-a-fiber-laser-engrave-slate.md) (2025-08-29): How to deep engrave slate coasters with a 60W MOPA fiber laser, with the LightBurn frequency, pulse and 3D Slice settings that cut 2.8mm into the stone.

## Contact

Email hoffman3dprinting@gmail.com for review units and collaborations.
