How I Test 3D Printers
Chris Hoffman · Updated
Every FDM printer review on this site comes from a printer I had on my own bench. This page explains what I do with it, so you can judge my results and my picks for yourself.
Full reviews and first looks
A full review is usually about a month of printing. A first look or hands-on is shorter: my impressions from the first prints, before I’ve lived with the printer. The title says which one you’re reading, and my buying guides note it when a pick’s evidence comes from a first look.
What I test
These are the tests that show up in most of my recent reviews. Not every review has every test, and when one is missing, the review and the 3D printer comparison leave it blank rather than guess.
- Unboxing and setup. I time how long it takes from opening the box to the first print, including the printer’s own calibration (bed leveling, Z offset, input shaping). Most recent printers take about 20 minutes.
- The Benchy. I print the sample Benchy that comes with the printer and note how long it took. When I slice one myself instead, the comparison table says “own slice”, because those times depend on my settings.
- Test prints with the stock profiles. Torture tests, dice towers with overhangs, and a full-height bust show bridges, overhangs, stringing and ringing. I start with the brand’s own slicer and profiles, because that’s what most people use, and I say so when tuning made a difference.
- Multicolor and purge waste. On printers with a multicolor system, I weigh the print and the purge waste. A small two-color Benchy often makes far more purge than it weighs, and that cost belongs in a review.
- Other materials. Where the printer is built for it, I try TPU, carbon fiber filaments or other materials beyond PLA and PETG.
- Noise. When I measure noise, the review says how: printing, idle or in a quiet mode.
- Software and app. The slicer, the printer’s screen, Wi-Fi printing and the phone app, including what’s missing.
How I pick printers for the guides
My buying guides only pick printers I’ve reviewed here, and each pick links to that review. The reasons I give for a pick come from the review: its verdict, its pros and cons and its test results. Printers I haven’t reviewed can appear in a separate list, clearly labeled, but I don’t make claims about how they print.
Who pays for what
Some printers are sent to me by the brand, and I buy others myself, some with help from my Patreon members. My recent reviews say which in their disclosure, and the opinions are my own. I earn a commission when you buy through my affiliate links, at no extra cost to you.
Prices
Prices on the site are what a printer sold for when I reviewed it. They change often, so check the current price before you buy.
