My shop gear

Viewers ask what is on my bench, so here it is. I only list things I can point to: a review where I recommended it, or a video where I said I use it. Where a machine is just one I reviewed and liked, I say so.

This post contains affiliate links. If you buy through them, I may earn a small commission at no extra cost to you. All opinions are my own.

Machines I recommend

These are machines I've reviewed and would point a friend to, for the right buyer. Not all of them are on my bench every day. Each one links to the full review, with the catch I found.

  • Flashforge AD5XA compact, fast CoreXY with four-color printing built in and the easiest setup I have had. The 220 mm build height is the catch.My reviewCheck price at Flashforge
  • Creality K1CEnclosed and fast, and it prints carbon fiber filaments without babysitting the nozzle. 220 x 220 x 250 mm is the limit.My reviewCheck price at Creality
  • Snapmaker U1Four toolheads with little purge waste, and Full Spectrum gets dozens of colors from four spools. If you mostly print one color, skip it.My reviewCheck price at Snapmaker
  • FLUX Beambox IIThe most polished CO2 laser I have used, and you pay for the polish. It suits production work and people who would rather not tinker.My reviewCheck price at FLUX
  • EM-Smart NovaA foldable 20W fiber laser with some of the best engraving quality I have seen at this power. Best if you mostly engrave.My reviewCheck price at EM-Smart
  • ComMarker B6 60W MOPAA compact MOPA fiber laser that handled every material I tested, with fast autofocus. A good fit for a small metal business.My reviewCheck price at ComMarker
  • Chitu Systems FilaPartner E1 filament dryerThe drying itself is ordinary. Buy it for the two chambers that come off and become sealed dry boxes you can print from.My reviewCheck price at Chitu Systems

On my bench

Gear I have said in a review or video that I use myself.

  • Anycubic Photon Mono M5The resin printer I use for my own prints. I haven’t reviewed it on the channel.
  • OMTech fume extractorThe fume extractor I run on my fiber laser. A HEPA fan pulling smoke and particles keeps the material clean and protects the laser.
  • TOPDON TCView thermal cameraThe thermal camera I used for the heat press temperature tests in my VEVOR Hybrid Heat Press review.Check price at Amazon

Laser materials

The blanks and sheet stock I use in my laser reviews, so you can repeat my tests.

Camera and studio

These are what I film and record with. They come from my Amazon list of video-making equipment, and the buy buttons open the whole list.

  • RODE NT1 5th Gen studio condenser microphoneThe microphone I record my voice with.Check price at Amazon
  • Nikon Z 30 with the 16-50mm lensThe camera I film with.Check price at Amazon
  • Godox ES45 desktop LED key lightA key light for filming at my desk.Check price at Amazon
  • Logitech Blue Yeti Nano USB microphoneA second, USB microphone on my list.Check price at Amazon
  • TopTes TS-501B decibel meterA sound level meter from my list. I report noise in decibels in my reviews, but my posts do not name the meter, so I'm not claiming it is the one behind every reading.Check price at Amazon
  • Saiqiang acoustic foam panels, 24-packFoam panels to deaden the room where I record.Check price at Amazon
  • Andoer W140 RGB LED video light kitAlso on my list, but Amazon currently shows it as unavailable.Check price at Amazon

3D printing equipment lists

My recommended 3D printing gear on Amazon, in three lists by experience level.