Laser Engravers I've Tested: Specs and Real Results

Laser engravers I’ve reviewed on the channel, side by side. Power, work area and rated speed are what each brand rates its machine for. The plywood cut is what I measured on my own bench, and each laser’s details add the engrave, acrylic and noise results from its review.

On a wider screen, click a column to sort it. Pick a laser type to narrow the list. Each laser links to its full review, where you’ll find the test pieces, the settings and the drawbacks that don’t fit in a table.

How I test

The plywood test is 3 mm birch plywood, cut at the speed I used in that review. A plain speed is a single pass. When a review used extra passes or lower power, the table says so, and those results sort after the single-pass cuts. Some reviews didn’t state the power setting. A dash means that review didn’t include the test.

Prices are what each laser sold for when I reviewed it, so check the current price before you buy.

LaserTypePrice at reviewBuy
ACMER P3 48W
Details

A powerful, fully enclosed diode laser that works out of the box, with the honeycomb panel, air assist compressor and camera included. It makes the most sense if you want fast cutting and a ready-to-run machine more than the lowest price for a 48W laser.

Air assist: yes

Diode48 W (405 nm)400 × 400 mm48,000 mm/min1,150 mm/min$1,199 May 2025Check price
AlgoLaser Alpha MK2 40W
Details

A fast, approachable open-frame cutting machine for someone who mainly wants to cut plywood and acrylic and color mark stainless steel. If fine photo engraving is your main goal, look at the 20W version instead.

Noise: 65 dB

Acrylic cut: 3 mm black, 600 mm/min

Air assist: yes

Diode40 W400 × 386 mm20,000 mm/min1,050 mm/min$999 Aug 2026Check price
ACMER S2 Pro 36W
Details

A bare-bones open-frame laser for someone who mainly wants to cut and already has a safe, well-ventilated place to run it. If it's going indoors, or anywhere other people can easily get to it, look at an enclosed machine instead.

Wood engrave: 15,000 mm/min

Acrylic cut: 3 mm black, 600 mm/min

Air assist: yes

Diode36 W400 × 400 mm24,000 mm/min900 mm/min$549 Oct 2026Check price
ACMER P2 33W Laser Engraver
Details

A pre-assembled 33W diode laser that cut 1/8 inch birch plywood in a single pass at 1000 mm/min and ran every test without an issue, easy to recommend for anyone looking for a high-powered benchtop laser. Plan on buying a honeycomb panel or other work surface, since none is included.

Air assist: yes

Diode33 W (455 nm)420 × 400 mm30,000 mm/min1,000 mm/min$1,199 Mar 2024Check price
TwoTrees TTS-20 Pro
Details

A 20W diode laser that comes almost fully assembled with an air assist compressor and honeycomb panel, and cut 3mm birch plywood at 600 mm/min in one pass, a good fit for both new and experienced users. It has no bump or flame detection, and engraving topped out at 10,000 mm/min rather than the 30,000 mm/min the website claims.

Wood engrave: 10,000 mm/min

Air assist: yes

Diode20 W (450 nm)418 × 418 mm–600 mm/min$639 Aug 2023Check price
WeCreat Lumos Flex
Details

A compact, enclosed dual-laser machine where both the 15W diode and the 15W fiber do useful work. It makes the most sense for a small business that wants to work across wood, acrylic, slate and metal on one machine, and can accept slower deep metal engraving, a small work area and WeCreat's MakeIt software instead of LightBurn.

Wood engrave: 120,000 mm/min

Acrylic cut: 3 mm black, 360 mm/min, 2 passes

Diode15 W116 × 116 mm600,000 mm/min324 mm/min$1,940 Nov 2026Check price
Sculpfun E1 Dual
Details

A precise enclosed laser for detail engraving and permanent marks on bare metal. If cutting thicker material is the priority, look at the 21W E1 Pro instead.

Wood engrave: 30,000 mm/min

Noise: 55 dB at 0.6 m

Acrylic cut: 3 mm black, 450 mm/min, 2 passes

Air assist: yes

Diode12 W (455 nm)400 × 320 mm36,000 mm/min450 mm/min$949 Sep 2026Check price
AtomStack Swift 12W
Details

Wood engrave: 10,000 mm/min

Acrylic cut: 3 mm black, 300 mm/min, 2 passes

Air assist: no

Diode12 W (455 nm)300 × 300 mm10,000 mm/min500 mm/min$119 (7W) / $169 (12W) Jan 2026Check price
Genmitsu Kintix 10W
Details

A fast, precise, fully enclosed Class 1 diode laser for wood, slate, dark acrylic and coated metals, once the scan angle is set to 85 degrees. It makes the most sense if you want galvo speed in an enclosed package and can work inside a 200 x 100mm area.

Wood engrave: 6,000 mm/min

Noise: 58 dB at 0.3 m

Acrylic cut: 3 mm black, 1,000 mm/min, 12 passes

Air assist: no

Diode10 W (455 nm)200 × 100 mm90,000 mm/min1,000 mm/min, 7 passes$359 May 2026Check price
Creality Falcon A1
Details

Noise: 61 dB at 0.3 m

Air assist: yes

Diode10 W (445 nm)381 × 305 mm36,000 mm/min720 mm/min$549 Apr 2026Check price
LOKLiK iEngrave Cover 10W
Details

A safe, enclosed entry-level 10W laser for hobbyists who mostly engrave. The offset air assist hose leaves soot on deeper wood work and slows reliable cuts.

Wood engrave: 6,000 mm/min

Acrylic cut: 3 mm black, 250 mm/min, 2 passes

Air assist: no

Diode10 W (455 nm)300 × 300 mm–300 mm/min$595 Aug 2025Check price
AlgoLaser DIY Kit MK2 10W
Details

An entry-level 10W diode laser for beginners who want fast cuts, fine focus and a touch screen that runs projects without a computer. Budget extra for a honeycomb panel and an air assist compressor.

Acrylic cut: 3 mm black, 300 mm/min, 2 passes

Diode10 W (455 nm)400 × 435 mm–350 mm/min$289 Mar 2025Check price
ACMER K1
Details

Wood engrave: 10,000 mm/min

Air assist: no

Diode7 W (455 nm)150 × 150 mm10,000 mm/min200 mm/min$299 USD (7W) Feb 2026Check price
Mecpow M1 5W
Details

A tiny, fully enclosed FDA Class 1 diode laser for crafters, teachers and parents who want safe engraving on a desk. The 100 x 100mm work area keeps it to coasters, keychains and patches.

Noise: 59 dB at 0.3 m

Acrylic cut: 3 mm black, 200 mm/min, 2 passes

Diode5 W (455 nm)100 × 100 mm10,000 mm/min280 mm/min$179 Jul 2026Check price
Genmitsu Kortek Laser
Details

Air assist: no

Diode5 W (455 nm)200 × 150 mm7,000 mm/min–$96 (2.5W) / $134 (5W) / $171 (10W) Nov 2025Check price
VEVOR A7 5W Laser Engraver
Details

A tightly focused 5W open-frame diode laser that cut faster than some 10W machines I've tested, for beginners with a ventilated space who will add a honeycomb bed and wear laser glasses. VEVOR's US store now lists the 5W model as discontinued.

Wood engrave: 12,000 mm/min

Acrylic cut: 3 mm black, 150 mm/min, 2 passes

Diode5 W (455 nm)410 × 400 mm–250 mm/min$248 Sep 2025No longer sold
Gweike G2 Max
Details

A 50W fiber laser that makes deep brass engraving much faster without losing detail. The catch is that frequency adjustment barely changes results, so plan to tune with power and speed instead.

Fiber50 W (1,064 nm)150 × 150 mm900,000 mm/min–$2,499 Mar 2025Check price
HansMaker F1 Pro 20W
Details

A strong first fiber laser from HansMaker, with stainless steel colors I'd only seen from MOPA lasers, deep brass engraving and a LightBurn Pro license in the box. Plan on starting every job from your computer, since there's no foot pedal or start button.

Fiber20 W (1,064 nm)110 × 110 mm600,000 mm/min––Check price
EM-Smart Nova 20W Fiber Laser
Details

A compact, foldable 20W fiber laser with some of the best engraving quality I've seen at this power level. A strong pick for hobbyists and small businesses who mostly engrave and only occasionally cut thin metal or deep engrave.

Fiber20 W (1,064 nm)110 × 110 mm600,000 mm/min–$1,499 Jul 2025Check price
Gweike G2
Details

At $1,599 for the manual lift model and $1,999 for the electric lift model, the G2 is an easy recommendation for a 20W fiber laser, with more than enough power for surface engraving. Deep metal engraving works but takes many passes, and the $400 step up to the electric lift is harder to recommend.

Fiber20 W (1,064 nm)150 × 150 mm––$1,999 Mar 2024Check price
ComMarker B6 60W MOPA
Details

A compact 60W MOPA fiber laser that handled every material I tested, with fast autofocus and a split or all-in-one layout. It fits a small business that wants a fully featured MOPA fiber laser, especially one working with metals.

MOPA60 W (1,064 nm)150 × 150 mm900,000 mm/min–$3,599 May 2025Check price
Monport GA60 60W MOPA Fiber Laser
Details

A capable 60W MOPA fiber laser with a large 175mm work area, autofocus and a Mark button, best for a small business. Monport no longer sells the GA60; the GA 100W is the current GA model.

MOPA60 W (1,064 nm)175 × 175 mm600,000 mm/min–$4,599 Apr 2025Check price
FLUX Beambox II
Details

The most polished CO2 laser I've used, and you pay for that polish. It makes the most sense if you run a business, do production work, or value your time more than tinkering with the machine.

Noise: 69 dB

Acrylic cut: 3 mm 600 mm/min

Air assist: yes

CO255 W600 × 375 mm54,000 mm/min900 mm/min at 15%$2,699 Sep 2026Check price
  • ACMER P3 48WDiode
    Power
    48 W (405 nm)
    Work area
    400 × 400 mm
    Rated speed
    48,000 mm/min
    3 mm plywood cut
    1,150 mm/min
    Price at review
    $1,199 May 2025

    A powerful, fully enclosed diode laser that works out of the box, with the honeycomb panel, air assist compressor and camera included. It makes the most sense if you want fast cutting and a ready-to-run machine more than the lowest price for a 48W laser.

    Check price
  • AlgoLaser Alpha MK2 40WDiode
    Power
    40 W
    Work area
    400 × 386 mm
    Rated speed
    20,000 mm/min
    3 mm plywood cut
    1,050 mm/min
    Noise
    65 dB
    Acrylic cut
    3 mm black, 600 mm/min
    Price at review
    $999 Aug 2026

    A fast, approachable open-frame cutting machine for someone who mainly wants to cut plywood and acrylic and color mark stainless steel. If fine photo engraving is your main goal, look at the 20W version instead.

    Check price
  • ACMER S2 Pro 36WDiode
    Power
    36 W
    Work area
    400 × 400 mm
    Rated speed
    24,000 mm/min
    3 mm plywood cut
    900 mm/min
    Wood engrave
    15,000 mm/min
    Acrylic cut
    3 mm black, 600 mm/min
    Price at review
    $549 Oct 2026

    A bare-bones open-frame laser for someone who mainly wants to cut and already has a safe, well-ventilated place to run it. If it's going indoors, or anywhere other people can easily get to it, look at an enclosed machine instead.

    Check price
  • ACMER P2 33W Laser EngraverDiode
    Power
    33 W (455 nm)
    Work area
    420 × 400 mm
    Rated speed
    30,000 mm/min
    3 mm plywood cut
    1,000 mm/min
    Price at review
    $1,199 Mar 2024

    A pre-assembled 33W diode laser that cut 1/8 inch birch plywood in a single pass at 1000 mm/min and ran every test without an issue, easy to recommend for anyone looking for a high-powered benchtop laser. Plan on buying a honeycomb panel or other work surface, since none is included.

    Check price
  • TwoTrees TTS-20 ProDiode
    Power
    20 W (450 nm)
    Work area
    418 × 418 mm
    3 mm plywood cut
    600 mm/min
    Wood engrave
    10,000 mm/min
    Price at review
    $639 Aug 2023

    A 20W diode laser that comes almost fully assembled with an air assist compressor and honeycomb panel, and cut 3mm birch plywood at 600 mm/min in one pass, a good fit for both new and experienced users. It has no bump or flame detection, and engraving topped out at 10,000 mm/min rather than the 30,000 mm/min the website claims.

    Check price
  • WeCreat Lumos FlexDiode
    Power
    15 W
    Work area
    116 × 116 mm
    Rated speed
    600,000 mm/min
    3 mm plywood cut
    324 mm/min
    Wood engrave
    120,000 mm/min
    Acrylic cut
    3 mm black, 360 mm/min, 2 passes
    Price at review
    $1,940 Nov 2026

    A compact, enclosed dual-laser machine where both the 15W diode and the 15W fiber do useful work. It makes the most sense for a small business that wants to work across wood, acrylic, slate and metal on one machine, and can accept slower deep metal engraving, a small work area and WeCreat's MakeIt software instead of LightBurn.

    Check price
  • Sculpfun E1 DualDiode
    Power
    12 W (455 nm)
    Work area
    400 × 320 mm
    Rated speed
    36,000 mm/min
    3 mm plywood cut
    450 mm/min
    Wood engrave
    30,000 mm/min
    Noise
    55 dB at 0.6 m
    Acrylic cut
    3 mm black, 450 mm/min, 2 passes
    Price at review
    $949 Sep 2026

    A precise enclosed laser for detail engraving and permanent marks on bare metal. If cutting thicker material is the priority, look at the 21W E1 Pro instead.

    Check price
  • AtomStack Swift 12WDiode
    Power
    12 W (455 nm)
    Work area
    300 × 300 mm
    Rated speed
    10,000 mm/min
    3 mm plywood cut
    500 mm/min
    Wood engrave
    10,000 mm/min
    Acrylic cut
    3 mm black, 300 mm/min, 2 passes
    Price at review
    $119 (7W) / $169 (12W) Jan 2026
    Check price
  • Genmitsu Kintix 10WDiode
    Power
    10 W (455 nm)
    Work area
    200 × 100 mm
    Rated speed
    90,000 mm/min
    3 mm plywood cut
    1,000 mm/min, 7 passes
    Wood engrave
    6,000 mm/min
    Noise
    58 dB at 0.3 m
    Acrylic cut
    3 mm black, 1,000 mm/min, 12 passes
    Price at review
    $359 May 2026

    A fast, precise, fully enclosed Class 1 diode laser for wood, slate, dark acrylic and coated metals, once the scan angle is set to 85 degrees. It makes the most sense if you want galvo speed in an enclosed package and can work inside a 200 x 100mm area.

    Check price
  • Creality Falcon A1Diode
    Power
    10 W (445 nm)
    Work area
    381 × 305 mm
    Rated speed
    36,000 mm/min
    3 mm plywood cut
    720 mm/min
    Noise
    61 dB at 0.3 m
    Price at review
    $549 Apr 2026
    Check price
  • LOKLiK iEngrave Cover 10WDiode
    Power
    10 W (455 nm)
    Work area
    300 × 300 mm
    3 mm plywood cut
    300 mm/min
    Wood engrave
    6,000 mm/min
    Acrylic cut
    3 mm black, 250 mm/min, 2 passes
    Price at review
    $595 Aug 2025

    A safe, enclosed entry-level 10W laser for hobbyists who mostly engrave. The offset air assist hose leaves soot on deeper wood work and slows reliable cuts.

    Check price
  • AlgoLaser DIY Kit MK2 10WDiode
    Power
    10 W (455 nm)
    Work area
    400 × 435 mm
    3 mm plywood cut
    350 mm/min
    Acrylic cut
    3 mm black, 300 mm/min, 2 passes
    Price at review
    $289 Mar 2025

    An entry-level 10W diode laser for beginners who want fast cuts, fine focus and a touch screen that runs projects without a computer. Budget extra for a honeycomb panel and an air assist compressor.

    Check price
  • ACMER K1Diode
    Power
    7 W (455 nm)
    Work area
    150 × 150 mm
    Rated speed
    10,000 mm/min
    3 mm plywood cut
    200 mm/min
    Wood engrave
    10,000 mm/min
    Price at review
    $299 USD (7W) Feb 2026
    Check price
  • Mecpow M1 5WDiode
    Power
    5 W (455 nm)
    Work area
    100 × 100 mm
    Rated speed
    10,000 mm/min
    3 mm plywood cut
    280 mm/min
    Noise
    59 dB at 0.3 m
    Acrylic cut
    3 mm black, 200 mm/min, 2 passes
    Price at review
    $179 Jul 2026

    A tiny, fully enclosed FDA Class 1 diode laser for crafters, teachers and parents who want safe engraving on a desk. The 100 x 100mm work area keeps it to coasters, keychains and patches.

    Check price
  • Genmitsu Kortek LaserDiode
    Power
    5 W (455 nm)
    Work area
    200 × 150 mm
    Rated speed
    7,000 mm/min
    Price at review
    $96 (2.5W) / $134 (5W) / $171 (10W) Nov 2025
    Check price
  • VEVOR A7 5W Laser EngraverDiode
    Power
    5 W (455 nm)
    Work area
    410 × 400 mm
    3 mm plywood cut
    250 mm/min
    Wood engrave
    12,000 mm/min
    Acrylic cut
    3 mm black, 150 mm/min, 2 passes
    Price at review
    $248 Sep 2025

    A tightly focused 5W open-frame diode laser that cut faster than some 10W machines I've tested, for beginners with a ventilated space who will add a honeycomb bed and wear laser glasses. VEVOR's US store now lists the 5W model as discontinued.

    No longer sold
  • Gweike G2 MaxFiber
    Power
    50 W (1,064 nm)
    Work area
    150 × 150 mm
    Rated speed
    900,000 mm/min
    Price at review
    $2,499 Mar 2025

    A 50W fiber laser that makes deep brass engraving much faster without losing detail. The catch is that frequency adjustment barely changes results, so plan to tune with power and speed instead.

    Check price
  • HansMaker F1 Pro 20WFiber
    Power
    20 W (1,064 nm)
    Work area
    110 × 110 mm
    Rated speed
    600,000 mm/min

    A strong first fiber laser from HansMaker, with stainless steel colors I'd only seen from MOPA lasers, deep brass engraving and a LightBurn Pro license in the box. Plan on starting every job from your computer, since there's no foot pedal or start button.

    Check price
  • EM-Smart Nova 20W Fiber LaserFiber
    Power
    20 W (1,064 nm)
    Work area
    110 × 110 mm
    Rated speed
    600,000 mm/min
    Price at review
    $1,499 Jul 2025

    A compact, foldable 20W fiber laser with some of the best engraving quality I've seen at this power level. A strong pick for hobbyists and small businesses who mostly engrave and only occasionally cut thin metal or deep engrave.

    Check price
  • Gweike G2Fiber
    Power
    20 W (1,064 nm)
    Work area
    150 × 150 mm
    Price at review
    $1,999 Mar 2024

    At $1,599 for the manual lift model and $1,999 for the electric lift model, the G2 is an easy recommendation for a 20W fiber laser, with more than enough power for surface engraving. Deep metal engraving works but takes many passes, and the $400 step up to the electric lift is harder to recommend.

    Check price
  • ComMarker B6 60W MOPAMOPA
    Power
    60 W (1,064 nm)
    Work area
    150 × 150 mm
    Rated speed
    900,000 mm/min
    Price at review
    $3,599 May 2025

    A compact 60W MOPA fiber laser that handled every material I tested, with fast autofocus and a split or all-in-one layout. It fits a small business that wants a fully featured MOPA fiber laser, especially one working with metals.

    Check price
  • Monport GA60 60W MOPA Fiber LaserMOPA
    Power
    60 W (1,064 nm)
    Work area
    175 × 175 mm
    Rated speed
    600,000 mm/min
    Price at review
    $4,599 Apr 2025

    A capable 60W MOPA fiber laser with a large 175mm work area, autofocus and a Mark button, best for a small business. Monport no longer sells the GA60; the GA 100W is the current GA model.

    Check price
  • FLUX Beambox IICO2
    Power
    55 W
    Work area
    600 × 375 mm
    Rated speed
    54,000 mm/min
    3 mm plywood cut
    900 mm/min at 15%
    Noise
    69 dB
    Acrylic cut
    3 mm 600 mm/min
    Price at review
    $2,699 Sep 2026

    The most polished CO2 laser I've used, and you pay for that polish. It makes the most sense if you run a business, do production work, or value your time more than tinkering with the machine.

    Check price

This post contains affiliate links. If you buy through them, I may earn a small commission at no extra cost to you. All opinions are my own.

All lasers reviews