Creality Ender-3 V3 Plus Review: Core-XZ at 600mm/s

A large-format Klipper printer that prints fast and clean out of the box, with an unusual Core-XZ motion system. A strong pick at $299 if you want a 300mm bed and modern Klipper features without the tinkering older Enders needed.
Check price at CrealityOn this page
The Creality Ender-3 V3 Plus prints a Benchy in 14 minutes, packs every Klipper feature into a 300mm printer, and does it with one of the strangest motion systems I’ve tested: Core-XZ. In this Creality Ender-3 V3 Plus review I cover how that coupled X and Z system works, how the printer handled a month of test prints at up to 600mm/s, and whether it’s worth $299.
Core-XZ Motion: Core-XY Turned on Its Side
The Ender-3 V3 Plus is the bigger brother of the Ender-3 V3 and inherits its first-of-its-kind motion system. Two stationary motors on the frame and a clever belt loop work together to move the hotend in both X and Z. You normally see this on Core-XY printers like the Two Trees SK1. Creality took that idea and turned it sideways.
Because both motors sit on the frame, they only move the mass of the hotend and rails. Working together, they’re rated for 600mm/s with 20,000mm/s² acceleration. I had no trouble pushing the printer to those speeds.
There’s no Z wobble to worry about either, since there are no Z lead screws. And the printer homes to the top-left corner, so every print starts with a reminder of how strange this design is.
Hotend, Nozzle and Direct Drive Extruder
The tri-metal nozzle is a 0.4mm copper nozzle with a hardened steel tip, and it unscrews easily. The steel tip resists wear from abrasive filaments like glow-in-the-dark and fiber-filled materials. A 60W ceramic heater takes it up to 300°C for nylon and polycarbonate.
The direct drive extruder mounts right on the hotend, with a locking lever for filament tension. Flip the lever and loading or unloading is easy. It was rock solid in my tests, with no issues even at 600mm/s.
Dual part cooling fans keep up with those speeds. I had no stringing problems, and overhangs and bridges printed fine.
Print Bed and Frame
The bed is magnetic, textured PEI spring steel. Adhesion was great while printing, and flexing the plate popped parts right off. Two stepper motors drive the bed on Y, so there’s plenty of power even when you use the whole 300 x 300mm bed.
The heated bed was spot on. Set to 60°C, it reached exactly 60°C, and the edges were only 1 to 2°C cooler.
The frame is cast aluminum, sturdy and light. Before assembly the Z gantry twists easily, but once it’s bolted down and the two rear support bars are on, the whole printer is very stable. A spool holder on the right side includes a filament runout sensor that pauses the print.
Touchscreen and Klipper Calibration
The 4.3 inch color touchscreen is one of the best I’ve used. Creality has come a long way on its interface: every menu is easy to navigate, file thumbnails make prints easy to find, and you can see your full print history.
The printer runs CrealityOS, Creality’s custom build of Klipper. One-touch calibration starts with input shaping: built-in accelerometers sweep through frequencies on every axis, measure how the printer vibrates, and tune motor control to cancel those vibrations. That removes the ghosting and ringing you’d otherwise see where the printer changes direction.
Then it runs auto Z-offset and bed leveling. No paper and no leveling screws, and I got a perfect first layer every time.
Assembly and Creality Print Software
Assembly took about 15 minutes: bolt on the X-Z gantry, attach the stabilizer rods and touchscreen, and plug in the cables. On first boot it walks you through WiFi setup and calibration. The manual is detailed, and Creality includes a lot of sample files.
Any slicer works, but Creality recommends Creality Print, which looks like a fork of OrcaSlicer. I’m impressed by it. The built-in Ender-3 V3 Plus profiles range from extra fine detail to quick drafts, and all of them worked without changes. Creality Print can also act as a print farm manager, monitoring all your Creality printers and opening their Klipper interfaces from inside the slicer. The Creality Cloud app lets you browse models and send prints wirelessly.
Ender-3 V3 Plus Test Prints
Most of the filament in my testing came from Sunlu. The sample files on the printer are a highlight: torture tests, calibration cubes, Benchies, spool holders, scrapers and a phone holder, all pre-sliced.
- Torture test: the best print of this file I’ve made. The top spikes had minimal stringing, and the overhangs were near perfect even at the shallowest angle and longest bridge.
- Phone holder: popped right off the bed, and the mechanism moved freely.
- 14 minute Benchy: a pleasure to watch, with infill at 600mm/s. The hull is remarkably smooth. The cabin edges aren’t perfectly straight, which is expected for a speed print.
- Desert Kiss dice tower: printed with the 0.1mm fine profile. The bed motors had no trouble with the weight, there was no drooping on the overhangs, and the layers on the top curve are very smooth.
- Captain America bust: printed at 500mm/s with 0.3mm layers in matte PLA. The base and torso are smooth, but two sections of the face have unexpected lines. The G-code looks correct, so it may be a printer or filament hiccup. Those are thick layers for 500mm/s, and matte filament can be temperamental at that speed.
- GCreate spaceship in spiral vase mode: printed fine, and the cooling handled the antenna tip. This was the only print with ringing artifacts, as if vase mode kept input shaping from working correctly.
Verdict: Should You Buy the Creality Ender-3 V3 Plus?
Creality did an excellent job with the Ender-3 V3 Plus. Gone are the days of Enders needing hours of tinkering to get good results: this one did it right out of the box. Core-XZ is an odd choice, and its advantages aren’t as clear as a typical Core-XY design, but it still delivered excellent prints. My guess is Creality needed a core-style motion system to reach 600mm/s and wanted to keep the upright Ender layout, since its K-series printers already use Core-XY.
The touchscreen is great, one-click calibration makes Klipper’s advanced features effortless, and wireless control through Creality Print and the app works well. Beginners will find it quick to assemble and start printing. Advanced users get fast speeds and a large build area without giving up quality. Only when I pushed thick layers at top speed did print quality slip.
At $299 when I reviewed it, I can easily recommend it if you want a large-format printer with modern Klipper features, and the only Core-XZ printer on the block. If you’d rather compare it with a traditional Core-XY, see my InfiMech TX review. Check the latest price at Creality.
Pros and cons
✓ Pros
- Ran at its rated 600mm/s with no extruder issues, and the included Benchy prints in 14 minutes
- One-touch calibration runs input shaping, auto Z-offset and bed leveling. Perfect first layer every time
- Best print of the included torture test I've made, with minimal stringing and clean overhangs
- Heated bed held its set temperature, with only 1 to 2°C less near the edges
- 300 x 300mm bed and dual Y motors handle heavy prints
- Hardened steel tipped nozzle and a 300°C hotend for abrasive and high-temperature filaments
- One of the best touchscreen interfaces I've used, with thumbnails and print history
- About 15 minutes of assembly, and the Creality Print profiles worked without changes
✗ Cons
- Core-XZ advantages aren't as obvious as a typical Core-XY design
- Defects on a Captain America bust printed at 500mm/s with 0.3mm layers in matte PLA
- Ringing artifacts showed up in spiral vase mode
- Z gantry twists easily until the support bars are bolted on
Specs
| Build Volume | 300 x 300 x 330mm |
|---|---|
| Motion System | Core-XZ (two frame-mounted motors drive X and Z together), dual Y motors for the bed |
| Max Speed and Acceleration | 600mm/s, 20,000mm/s² |
| Hotend Max Temp | 300°C, 60W ceramic heater |
| Nozzle | 0.4mm tri-metal (copper with a hardened steel tip) |
| Extruder | Direct drive with a locking lever |
| Bed | Heated, magnetic textured PEI spring steel |
| Enclosure | None (open frame, cast aluminum) |
| Firmware | CrealityOS (Creality's Klipper build) with input shaping, auto Z-offset and auto bed leveling |
| Screen | 4.3 inch color touchscreen |
| Connectivity | WiFi, Creality Print and the Creality Cloud app, USB stick |
Where to buy
- Creality Ender-3 V3 PlusCheck price →
- Creality Ender-3 V3 PlusCheck price →
- Sunlu 1kg PLA (filament used in this review)Check price →
- Sunlu 1kg Matte PLA (filament used in this review)Check price →
Prices may have changed since this review.
FAQ
Is the Creality Ender-3 V3 Plus worth it?
At $299 when I reviewed it, I can easily recommend it. It's a Klipper-powered printer with a 300 x 300mm bed that printed fast and clean out of the box. Print quality only dropped when I pushed thick layers at top speed.
What is a Core-XZ 3D printer?
A Core-XZ printer couples the X and Z axes. Two stationary motors on the frame and a belt loop move the hotend left, right, up and down together, much like a Core-XY system turned on its side. The motors only move the hotend and rails, and since there are no Z lead screws there is no Z wobble. The printer homes to the top-left corner.
How fast can the Ender-3 V3 Plus print?
It's rated for 600mm/s with 20,000mm/s² acceleration, and I had no problems pushing it to those speeds. The included Benchy prints in 14 minutes with very little to criticize. A Captain America bust at 500mm/s with 0.3mm layers in matte PLA showed some defects on the face.
Which slicer should you use with the Ender-3 V3 Plus?
Any slicer works, but Creality recommends Creality Print, which appears to be a fork of OrcaSlicer. Its built-in Ender-3 V3 Plus profiles worked without modification, and it can also monitor and manage multiple Creality printers.
This Creality Ender-3 V3 Plus was provided by SainSmart for review. SainSmart did not pay for this review. This post contains affiliate links. If you purchase through them, I may earn a small commission at no extra cost to you. All opinions are my own.



